The LG terminal is a line filter ground terminal in the power supply module. It is intended for guiding any external noi

It is possible with the Ethernet module software version V36 or later by using the F_READ (read)/F_WRITE (write) FB. Af

Use the 'Excitation timing output' signal for the Z-phase pulse when a stepping motor is used.

RS-485 is upper compatible with RS-422. In general, RS-422 devices mainly use 4-wire connection method, while RS-485 dev

Yes, it is possible. Of the parameter setting items of initialization, changes made to specific parameter items (such as

Modules that use the processor bus, such as the P/PE link and FL-net modules, need be mounted on the slot equipped with

Both Standard and Expert (D300win) are program loader software for the SX series. However, there is no compatibility be

R_STS = 1 means 'send buffer overflow' detected by the general-purpose communication module. Check the communication for

We offer the sample program using the pulse count function for the high-speed input module. You can download the sample

The bus can be extended with the SX bus electrical repeater (Type_ NP2L-RP1). Up to three repeaters can be used in one

Search by category

Keyword Search

FAQ within [ PLC ]

1-10 of Total 398

≪ 1 / 40page ≫

What is the difference between the LG and FG terminals of the power supply module (Type_ NP1S-22)?

The LG terminal is a line filter ground terminal in the power supply module. It is intended for guiding any external noise produced in the power supply or sw... Show Detail
- No：1374
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 10:52
- Category： Main unit
Is it possible to read and write the IP address and port reference number of an Ethernet module (Type_ NP1L-ET1) by using a user application?

It is possible with the Ethernet module software version V36 or later by using the F_READ (read)/F_WRITE (write) FB. After writing, the power (or reset) o... Show Detail
- No：1370
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 15:42
- Category： Communication (Ethernet)
How can I provide Z-phase pulses when the equipment connected with the positioning control module (Type_ NP1F-MP2/MA2) uses a stepping motor?

Use the 'Excitation timing output' signal for the Z-phase pulse when a stepping motor is used. Show Detail
- No：1574
- Displayed Date：2023/04/25 19:00
- Category： Function
What is the difference between RS-485 and RS-422 ?

RS-485 is upper compatible with RS-422. In general, RS-422 devices mainly use 4-wire connection method, while RS-485 devices mainly use 2-wire connection met... Show Detail
- No：1521
- Displayed Date：2023/04/25 19:00
- Category： Communication (Others)
In the communication module (NP1L-RS1/RS2/RS3/RS4/RS5), is it possible to change communication parameter such as fixed length to variable length af...

Yes, it is possible. Of the parameter setting items of initialization, changes made to specific parameter items (such as frame detection, code conversion and... Show Detail
- No：1639
- Displayed Date：2023/04/25 19:00
- Category： Communication (Others)
Are there any restrictions on the mounting position of the I/O modules and communication modules on the base? I'd like to place the communication m...

Modules that use the processor bus, such as the P/PE link and FL-net modules, need be mounted on the slot equipped with the processor bus. Other communicati... Show Detail
- No：1673
- Displayed Date：2023/04/25 19:00
- Category： Others
I want to edit the program of the PLC (SX series). In the catalogue and website, I found that two types of program loaders, Standard and Expert (D3...

Both Standard and Expert (D300win) are program loader software for the SX series. However, there is no compatibility between program data (called 'project')... Show Detail
- No：1646
- Displayed Date：2023/04/25 19:00
- Category： Support tool
When the MODBUS master standard expansion FB _C_modm operates, the receive status becomes R_STS = 1. This is not shown in the receive status list. ...

R_STS = 1 means 'send buffer overflow' detected by the general-purpose communication module. Check the communication format, communication interval and other... Show Detail
- No：1607
- Displayed Date：2023/04/25 19:00
- Category： Communication (Others)
How can I use the pulse count function of the high-speed input module (Type_NP1X3206-A)?

We offer the sample program using the pulse count function for the high-speed input module. You can download the sample program and How-to Guide for it from... Show Detail
- No：1483
- Displayed Date：2023/04/25 19:00
- Category： Main unit
The total extension of the SX bus has exceeded 25 m. Is there anything to relay the connection?

The bus can be extended with the SX bus electrical repeater (Type_ NP2L-RP1). Up to three repeaters can be used in one system. (When three repeaters are us... Show Detail
- No：1550
- Displayed Date：2023/04/25 19:00
- Category： Communication (Others)