In MICREX-F personal computer loader for Windows (Type_NL4N-WNSB), programs cannot be transferred to the processor. ([Load] in the menu is not enab...

[Load] is enabled when the personal computer loader is connected online. * For online connection, see 'Section 3 Online Operations' in the user's manual ... Show Detail

I am using the loader software 'MICREX-F PLC Programmer' (Type_NL4N-WNSB). Its version is old and does not support the latest Windows OS. Can I upg...

You cannot upgrade 'MICREX-F PLC Programmer' free of change. 'MICREX-F PLC Programmer' that can be installed as NL4N-WNSB is currently included with the p... Show Detail

I would like to read and write programs of the MICREX-F series on a personal computer (Windows 10). What loader software and connection cable are r...

The following loader software and adapter are required. 1) Loader software ・NP4H-SWN The product CD of NP4H-SWN includes the loader software 'MICREX... Show Detail

I used up differential relay memory. Can I create differential instructions by an application program?

You can use the following program as an alternative. When you turn on the differential command 'M0,' the differential output 'M2' turns ON for one scan. ... Show Detail

I bought a USB 3.0 cable (A-B type) to connect to FLT-ASFKA. However, I cannot connect them.

FLT-ASFKA is equipped with a USB2.0 (B type) connector. The connecter shape is different between USB 3.0 (B type) and a USB 2.0 (B type). Purchase a USB 2.0 ... Show Detail

When connecting devices on T-link, do I have to install a T-link master at the starting point (either end) of the connection configuration?

You can install a T-link master (processor part in the case of MICREX-F series) at any position on the T-link transmission line. Show Detail

Do I have to connect T-link devices (slave stations) connected to T-link in ascending order of address?

No, you do not have to connect T-link devices in ascending order of address. In addition, you can assign addresses at some intervals for the future expans... Show Detail

Which OS does MICREX-F PLC Programmer support?

The supported Windows OS depends on the loader version. Windows 7: V1.3.3.2 or later, Windows 8: V1.3.4.1 or later, Windows 8.1 and 10: V1.3.5.0 or... Show Detail

Is the programming support tool for MICREX-F series (MICREX-F PLC Programmer) still available?

Yes, it is. Ordering code: NP4H-SWN (The loader software for MICREX-F is included in the product CD together with the loader software for MICREX-SX.) Show Detail