When you use preset operation in the linear operation mode, counting is sometimes discontinued due to preset overflow. Show Detail
No, you cannot access the input (output) parameter (WV*, DV*) for which the data length is set in words/ double-words by using a bit address within the user ... Show Detail
Fuji Electric offers a multiple-license (multi-license) agreement. You need to purchase licenses for all PCs on which the software will be installed and use... Show Detail
You don't need a dedicated cable. Since the parameters will be set via the CPU module, you need a loader cable for the PLC and the program loader software. Show Detail
Modules that use the processor bus, such as the P/PE link and FL-net modules, need be mounted on the slot equipped with the processor bus. Other communicati... Show Detail
When replacing SPB (N mode) with SPF, can I use the program without change?
SPF does not support N mode. Therefore, to use the program of SPB (N mode) in SPF, you need to convert it. Refer to the following manual for how to conve... Show Detail
I want to use a personal computer loader with a MICREX-F series PLC.
The following devices are necessary to connect a personal computer loader and a MICREX-F series PLC: a loader adapter FLT-ASFKA (or FLT-ASFK), and a USB cab... Show Detail
Yes, D300win (V3.6.14.22 or later version) has the 'SXPLC simulator' function which allows you to check circuit operations on your personal computer. * Thi... Show Detail
Newly purchased SPF shows Battery error. How can I solve it ?
Since the primary battery built in the SPF main unit cannot be replaced, the battery connection switch is set to off at the factory shipment. By turning on t... Show Detail
A nonfatal fault of the takt cycle monitoring error has occurred. What is a possible cause?
The takt cycle monitoring error is caused by the following factors_ (1) The preset takt cycle value specified in the system definition is shorter than the ac... Show Detail
1-10 of Total 398