For the Standard loader V2, you cannot specify array data for the operand that specifies the first address. (An error is

Use the following communication cables from Furukawa Electric Co., Ltd. ・KPEV-SB 0.75mm2 x 1 pair (Max. length: 700m)

You can install a T-link master (processor part in the case of MICREX-F series) at any position on the T-link transmissi

The IP address is not assigned automatically. (DHCP function is not supported.) The default IP address is '192.168.0.1

The following CPU modules and versions support the above. ・ NP1PH-08/16: V22 or later ・ NP1PS-32:V26 or later ・ NP1PS

Yes, you can use FNC130A-C10 in combination with FNC120A-C10. Attach the same type of optical adapters at the both ends

There is a limit to the number of words for the I/O modules that can be mounted on a T-link expansion (Type_ NP1L-RT1) b

Yes, it is possible. Use a card with the following memory capacities_ SPH300_ 2 GB or less SPH2000_ 32 GB or less (PI

Check that the terminating plug is attached. Check also that the SX bus expansion cable is not broken. You need to att

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC

Latest FAQ

I creat user FB in StandardV3, and defined input/output parameter as word (WV). Can I directly access any bit within this parameter WV?
When I write parameter to LonWorks module (NP1L-LW1) using support tool for a LonWorks (NP4N-LNDF), what is the required cable?
When I set the high-speed counter module (NP1F-HC2) to the preset operation mode of the multi-functional counter FB, the preset is disabled in the ...
We share the D300win and other PLC engineering tool software among several people. Do we need to purchase the software for each person?
Are there any restrictions on the mounting position of the I/O modules and communication modules on the base? I'd like to place the communication m...

GLOBAL

Search by category

Keyword Search

FAQ within [ PLC ]

341-350 of Total 398

≪ 35 / 40page ≫

When I defined array (example WL990[WL0]) as start addoress of FMOVE in StandardV2 loader, error was detected by error check. Why?

For the Standard loader V2, you cannot specify array data for the operand that specifies the first address. (An error is detected during the program check.) ... Show Detail
- No：1665
- Displayed Date：2023/04/25 19:00
- Category： Support tool (Standard)
What cable should I use for T-link?

Use the following communication cables from Furukawa Electric Co., Ltd. ・KPEV-SB 0.75mm2 x 1 pair (Max. length: 700m) ・T-KPEV-SB 1.25mm2 x 1 pair (Max. le... Show Detail
- No：1278
- Displayed Date：2023/04/25 19:00
- Category： Communication (T-link)
When connecting devices on T-link, do I have to install a T-link master at the starting point (either end) of the connection configuration?

You can install a T-link master (processor part in the case of MICREX-F series) at any position on the T-link transmission line. Show Detail
- No：1280
- Displayed Date：2023/04/25 19:00
- Category： Communication (T-link)
Does the USB driver for SPF that is used to connect a personal computer loader support Windows 10?

Yes, it supports Windows 10. Show Detail
- No：1488
- Displayed Date：2023/04/25 19:00
- Category： Support tool
I use the Ethernet module (Type_NP1L-ET1). Is the IP address assigned automatically?

The IP address is not assigned automatically. (DHCP function is not supported.) The default IP address is '192.168.0.1'. You can check the IP address b... Show Detail
- No：1595
- Displayed Date：2023/04/25 19:00
- Category： Communication (Ethernet)
Which CPU modules and versions support the use of NW0H-CA3 (loader connection cable) + NP4H-CVU (USB/RS-422 convertor)?

The following CPU modules and versions support the above. ・ NP1PH-08/16: V22 or later ・ NP1PS-32:V26 or later ・ NP1PS-32R/74R/117R:V29 or later ・ NP1PS-2... Show Detail
- No：1481
- Displayed Date：2023/04/25 19:00
- Category： Accessory
Instead of FNC120A-C10, can I use FNC130A-C10?

Yes, you can use FNC130A-C10 in combination with FNC120A-C10. Attach the same type of optical adapters at the both ends of the optical fiber. FNC130A has t... Show Detail
- No：1282
- Displayed Date：2023/04/25 19:00
- Category： Communication (T-link)
I attempted to register 10 units of thermocouple input module (Type_ NP1AXH4-TC) on the T-link expansion (Type_ NP1L-RT1) base but it was not possi...

There is a limit to the number of words for the I/O modules that can be mounted on a T-link expansion (Type_ NP1L-RT1) base_ 128. With the thermocouple inpu... Show Detail
- No：1333
- Displayed Date：2023/04/25 19:00
- Category： Communication (T-link)
Is it possible to use a commercial CF card for the CPU module supporting CF card mounting?

Yes, it is possible. Use a card with the following memory capacities_ 　SPH300_ 2 GB or less SPH2000_ 32 GB or less (PIO mode supporting model) Note that so... Show Detail
- No：1593
- Displayed Date：2023/04/25 19:00
- Category： Accessory
In the diagnostic screen, error message 'Fatal failure SX bus error Time up error of deciding SBM use mode' appeared. What are the possible cause...

Check that the terminating plug is attached. Check also that the SX bus expansion cable is not broken. You need to attach an SX bus terminating plug at bot... Show Detail
- No：1648
- Displayed Date：2023/04/25 19:00
- Category： Communication (Others)