No, it is not possible. Only one program can be stored.

The Standard Loader (V2.0.3.0 or later) supports SC instruction of the same specification as that of the MICREX-F Series

Since the slave is connected to T-link, it is handled as a 'T-link capsule.' Select the T-link capsule and set the numb

You can check it with the status indication LED on the front of the module. When a low battery voltage is detected, the

No, you can't. You can check the IP address by connecting the PC loader to the CPU module and monitoring the RAS informa

Both the pulse output and control output are open collector outputs. They should be used within the following ranges (1)

During battery-less operation, previous fault information and other 'history of RAS' are not saved. Only the present RAS

Yes_ however, it is not recommended in terms of program reuse. It is better to use internal memory such as M and L by c

The multiplication of the high-speed counter module is automatically set as follows depending on the input pulse form_

No, it does not support multicast transmission (sending/receiving). It does support broadcast transmission (sending/rec

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC

Latest FAQ

I creat user FB in StandardV3, and defined input/output parameter as word (WV). Can I directly access any bit within this parameter WV?
When I write parameter to LonWorks module (NP1L-LW1) using support tool for a LonWorks (NP4N-LNDF), what is the required cable?
When I set the high-speed counter module (NP1F-HC2) to the preset operation mode of the multi-functional counter FB, the preset is disabled in the ...
We share the D300win and other PLC engineering tool software among several people. Do we need to purchase the software for each person?
Are there any restrictions on the mounting position of the I/O modules and communication modules on the base? I'd like to place the communication m...

GLOBAL

Search by category

Keyword Search

FAQ within [ PLC ]

261-270 of Total 398

≪ 27 / 40page ≫

Can I store multiple programs in the user ROM card (CF or SD) ?

No, it is not possible. Only one program can be stored. Show Detail
- No：1298
- Displayed Date：2023/04/25 19:00
- Category： Main unit
Does the SPH Series have SC instruction (step control instruction)?

The Standard Loader (V2.0.3.0 or later) supports SC instruction of the same specification as that of the MICREX-F Series. Show Detail
- No：1288
- Displayed Date：2023/04/25 19:00
- Category： Application
I want to register a T-link slave (NP1L-TS1) under T-link master (NP1L-TL1), but the T-link slave is not shown in the list of system definition. Ho...

Since the slave is connected to T-link, it is handled as a 'T-link capsule.' Select the T-link capsule and set the numbers of input/output words in the par... Show Detail
- No：1642
- Displayed Date：2023/04/25 19:00
- Category： Communication (T-link)
How can I detect a low battery voltage of the SRAM card with the memory card interface module (Type_ NP1F-MM1)?

You can check it with the status indication LED on the front of the module. When a low battery voltage is detected, the CER LED on the front of the module ... Show Detail
- No：1620
- Displayed Date：2023/04/25 19:00
- Category： Function
When I forget the IP address of the WEB module (Type_ NP1L-WE1), can I change the IP from an external network?

No, you can't. You can check the IP address by connecting the PC loader to the CPU module and monitoring the RAS information of the fault diagnosis function. Show Detail
- No：1616
- Displayed Date：2023/04/25 19:00
- Category： Communication (Ethernet)
I use the pulse train output positioning control module (Type_ NP1F-HP2). Please tell me the rated voltage/current of the pulse output and control ...

Both the pulse output and control output are open collector outputs. They should be used within the following ranges (1) Pulse output_ 30 V DC, 40 mA or less... Show Detail
- No：1602
- Displayed Date：2023/04/25 19:00
- Category： Function
When you use battery-less operation on the SPH, is the history of RAS information recorded?

During battery-less operation, previous fault information and other 'history of RAS' are not saved. Only the present RAS information is displayed. Show Detail
- No：1579
- Displayed Date：2023/04/25 19:00
- Category： Main unit
Is it possible to use the M/L area in the user FB with the Standard Loader (Type_ NP4H-SWN)?

Yes_ however, it is not recommended in terms of program reuse. It is better to use internal memory such as M and L by connecting them to the I/O terminals ... Show Detail
- No：1565
- Displayed Date：2023/04/25 19:00
- Category： Support tool (Standard)
I use the high-speed counter module (Type_ NP1F-HC□). The user's manual (FEH210) shows 'Multiplication function_ x1, x4.' How can I switch between ...

The multiplication of the high-speed counter module is automatically set as follows depending on the input pulse form_ ･ Forward pulse + Reverse pulse_ x1 ... Show Detail
- No：1564
- Displayed Date：2023/04/25 19:00
- Category： Function
Does the Ethernet module of the MICREX-SX (Type_ NP1L-ET1/ET2) support TCP/IP multicast transmission (sending/receiving)?

No, it does not support multicast transmission (sending/receiving). It does support broadcast transmission (sending/receiving). Show Detail
- No：1536
- Displayed Date：2023/04/25 19:00
- Category： Communication (Ethernet)