The backup battery is intended to back up the data memory (SRAM) inside of the CPU. While the system is turned on, the p

Timers (or other FBs such as counters) each have an internal memory that is called an instance. Therefore, after copyi

The set value of the timer must be a 32-bit (double-word) value. Specify DM (double-word), not WM (single-word). The mem

Unfortunately, information in a device connected to the master module cannot be read even by building a user application

The file transfer error occurs because the module driver is downloaded with the Ethernet module not recognized by the CP

Pulse output completion is indicated by the 'Command pulse zero' signal. Normally, it is '1' to indicate the status of

Yes, it is possible. Method 1): You can use the 'Backup' function of the SX control utility function in D300win V3.1 o

When the common memory system is used, this can be achieved by handshaking with an application using part of the link me

Pulse input type_ A-phase for the pulse and B-phase for the sign.

NP4H-CB2 cannot be combined with a BLACK BOX converter for use. Use NP4H-CB2 in combination with a converter NW0H-CNV (

Search by category

Keyword Search

FAQ within [ PLC ]

261-270 of Total 398

≪ 27 / 40page ≫

Is the backup battery consumed while the control power supply of the CPU is active?

The backup battery is intended to back up the data memory (SRAM) inside of the CPU. While the system is turned on, the power is supplied from the control pow... Show Detail
- No：1621
- Displayed Date：2023/04/25 19:00
- Category： Accessory
In Expert (D300win), I copied and pasted an existing timer (or counter) to add timer. However, a compilation error (Function block or structure cor...

Timers (or other FBs such as counters) each have an internal memory that is called an instance. Therefore, after copying a timer, you need to define a vari... Show Detail
- No：1656
- Displayed Date：2023/04/25 19:00
- Category： Support tool (D300win)
When I used the Standard Loader (Type_ NP4H-SWN) to input a timer instruction and specified the WM area for indirectly specifying the timer set val...

The set value of the timer must be a 32-bit (double-word) value. Specify DM (double-word), not WM (single-word). The memory to use may be DX or DL, as well a... Show Detail
- No：1361
- Displayed Date：2023/04/25 19:00
- Category： Support tool (Standard)
Is there any way to check the vendor ID, product code, product revision, serial No., etc. of the slave from the DeviceNet master module (Type_ NP1L...

Unfortunately, information in a device connected to the master module cannot be read even by building a user application. Please use the dedicated configura... Show Detail
- No：1387
- Displayed Date：2023/04/25 19:00
- Category： Communication (Others)
When I use an Ethernet module (Type_ NP1L-ET□) to download the system definitions and module driver, a file transfer error is generated. Why?

The file transfer error occurs because the module driver is downloaded with the Ethernet module not recognized by the CPU. For the CPU to recognize the Ethe... Show Detail
- No：1404
- Displayed Date：2023/04/25 19:00
- Category： Communication (Ethernet)
Which is the signal that indicates pulse output completion on the positioning control module (Type_ NP1F-MP2)?

Pulse output completion is indicated by the 'Command pulse zero' signal. Normally, it is '1' to indicate the status of completion. When the number of pulses... Show Detail
- No：1548
- Displayed Date：2023/04/25 19:00
- Category： Function
Is it possible to read the internal data of the SPH CPU to a file and display it on spreadsheet software such as Excel?

Yes, it is possible. Method 1): You can use the 'Backup' function of the SX control utility function in D300win V3.1 or later to save the internal data in ... Show Detail
- No：1606
- Displayed Date：2023/04/25 19:00
- Category： Support tool
With the FL-net module (NP1L-FL1/FL2/FL3), is there any way to confirm that the data sent from the node-A have actually been received by the node-B?

When the common memory system is used, this can be achieved by handshaking with an application using part of the link memory. Without handshaking, it is not... Show Detail
- No：1638
- Displayed Date：2023/04/25 19:00
- Category： Communication (Others)
With the multi-channel high-speed counter module (Type_ NP1F-HC8), how can a single-phase pulse be received?

Pulse input type_ A-phase for the pulse and B-phase for the sign. Show Detail
- No：1366
- Displayed Date：2023/04/25 19:00
- Category： Function
Is it possible to use the loader connection cable NP4H-CB2 in combination with a converter provided by BLACK BOX?

NP4H-CB2 cannot be combined with a BLACK BOX converter for use. Use NP4H-CB2 in combination with a converter NW0H-CNV (for RS-232C) or NP4H-CVU (for USB). Show Detail
- No：1372
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 15:43
- Category： Accessory

261-270 of Total 398

PLC

Common to N
- Support tool (Others)
Common to SX
- Support tool (D300win)
- |Application
- |Support tool
- |Support tool (Standard)
- |Others
- |Accessory
- |Error
- |Communication (T-link)
- |Function
- |Communication (Others)
- |Main unit
- |Communication (Ethernet)

SPB
SPF
- Others
- |Support tool
- |Communication (Ethernet)
- |Communication (Others)
- |Main unit
- |Application

SPH
- Communication (T-link)
- |Support tool (D300win)
- |Others
- |Communication (Others)
- |Main unit
- |Function
- |Communication (Ethernet)
- |Application
- |Accessory
- |Support tool (Standard)
- |I/O
- |Error
- |Support tool

Info & News

To Top of Page

PLC

Regional Websites

About Us

Products & Solutions

Investor Relations

Sustainability

Latest FAQ

GLOBAL

Search by category

Keyword Search

FAQ within [ PLC ]

PLC

Info & News