It is possible with the Ethernet module software version V36 or later by using the F_READ (read)/F_WRITE (write) FB. Af

When you do not check 'RETAIN' on the variable worksheet (default), the variable is treated as a non-retain memory. Wh

One likely cause is that any of the following characters is used in the variable worksheet (1) A double-byte space is u

The purpose of a dummy module is to use it as a temporary replacement of an I/O module that has been defined with the sy

The Standard Loader (V2.0.3.0 or later) supports SC instruction of the same specification as that of the MICREX-F Series

It is not provided as internal memory. You need to create the circuit shown in the attached diagram. The example shows a

Both the pulse output and control output are open collector outputs. They should be used within the following ranges (1)

You cannot mount the following I/O modules_ (1) High-speed input module NP1X3206-A, (2) High-speed output module NP1Y32

Yes, a CPU is necessary. In the case of a system with no CPU, the input status LED does not work even if signals are ext

This problem is probably caused by the following reasons: [For SPH300/2000/3000 series] 1) The CPU mode selection switc

Search by category

Keyword Search

FAQ within [ PLC ]

211-220 of Total 398

≪ 22 / 40page ≫

Is it possible to read and write the IP address and port reference number of an Ethernet module (Type_ NP1L-ET1) by using a user application?

It is possible with the Ethernet module software version V36 or later by using the F_READ (read)/F_WRITE (write) FB. After writing, the power (or reset) o... Show Detail
- No：1370
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 15:42
- Category： Communication (Ethernet)
When compiling a D300win project, an error message appears saying 'This variable address： %M* 3.z is treated as a retain memory.' Why does this mes...

When you do not check 'RETAIN' on the variable worksheet (default), the variable is treated as a non-retain memory. When you check 'RETAIN,' the variable i... Show Detail
- No：1368
- Displayed Date：2023/04/25 19:00
- Category： Support tool (D300win)
With D300win V2, I created global variables first and edited a ladder but some variables do not appear on the pull-down list for variable name inpu...

One likely cause is that any of the following characters is used in the variable worksheet (1) A double-byte space is used. Use a single-byte space or tab... Show Detail
- No：1356
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 15:38
- Category： Support tool (D300win)
I cannot register a dummy module (Type_ NP1F-DMY) with the system definitions using the loader.

The purpose of a dummy module is to use it as a temporary replacement of an I/O module that has been defined with the system but does not actually exist for ... Show Detail
- No：1348
- Displayed Date：2023/04/25 19:00
- Category： Function
Does the SPH Series have SC instruction (step control instruction)?

The Standard Loader (V2.0.3.0 or later) supports SC instruction of the same specification as that of the MICREX-F Series. Show Detail
- No：1288
- Displayed Date：2023/04/25 19:00
- Category： Application
I create a program for the SPH by using the Standard Loader (Type_ NP4H-SWN). Is flicker relay memory available?

It is not provided as internal memory. You need to create the circuit shown in the attached diagram. The example shows a circuit in which M0 repeats ON and O... Show Detail
- No：1605
- Displayed Date：2023/04/25 19:00
- Category： Application
I use the pulse train output positioning control module (Type_ NP1F-HP2). Please tell me the rated voltage/current of the pulse output and control ...

Both the pulse output and control output are open collector outputs. They should be used within the following ranges (1) Pulse output_ 30 V DC, 40 mA or less... Show Detail
- No：1602
- Displayed Date：2023/04/25 19:00
- Category： Function
Are there any I/O modules that cannot be mounted on the T-link expansion base?

You cannot mount the following I/O modules_ 　(1) High-speed input module NP1X3206-A, (2) High-speed output module NP1Y32T09P1-A, (3) Analog input module NP... Show Detail
- No：1577
- Displayed Date：2023/04/25 19:00
- Category： Communication (T-link)
Is a CPU necessary to check I/O? Input signals to the input terminals of an input module are turned ON, however, the input status LED remains OFF.

Yes, a CPU is necessary. In the case of a system with no CPU, the input status LED does not work even if signals are externally input into the input module. Show Detail
- No：1537
- Displayed Date：2023/04/25 19:00
- Category： Communication (Others)
I cannot download a project to the user ROM card inserted in the CPU. What is a possible cause?

This problem is probably caused by the following reasons: [For SPH300/2000/3000 series] 1) The CPU mode selection switch is not set at the 'UROM-TERM' pos... Show Detail
- No：1528
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 13:47
- Category： Support tool