No, you cannot. Use the dedicated loader cable (Type_NW0H-CA3).

Select a T-link capsule and set the numbers of input/output words. By default, a POD requires one word for input and o

UI4 is not supported by the specification with the VB automation interface. Meanwhile, UI4 is supported by the custom in

The communication specification of the remote master does not control remote devices by the station No. Therefore, you c

This problem is probably caused by the following reasons: [For SPH300/2000/3000 series] 1) The CPU mode selection swi

No, you cannot upload a definition file. So, it is very important to keep backup of Definition file on PC side.

No, you cannot use the I/O extension function in a multi-CPU configuration. Register a remote I/O master module in t

There is a possibility of mismatch between the project in the user ROM card and the CPU memory. On the 'Failure diagnosi

No, you cannot use NW0H-CNV. The RS-232C/422 converter for personal computer loaders (Type_NW0H-CNV) needs to be supplie

Move to the item ID without using the access path on the client side (D_).

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC > SPH > Support tool

Latest FAQ

I attempted to clear the memory in a CPU with the 'Clear' command for online operations, however, I got a message saying 'Clearing failed' and coul...
I have connected the SX series CPU and the loader PC via USB. I have installed the USB driver and configured the communication settings, but commun...
When I try to register a remote I/O master module using the I/O extension function in a multi-CPU configuration in the system definition, an error ...
When I use the SX communication middleware (Type_ NP4N-MDLW) and specify (_) in the access path during the item registration for the client, Errno=...
The loader connector of SPH series CPU modules has been changed into RJ45 connector. Can I use an RS-232C/422 converter for personal computer loade...

GLOBAL

Search by category

Keyword Search

FAQ within [ Support tool ]

1-10 of Total 11

≪ 1 / 2page ≫

Can I use a commercially available LAN cable as a loader cable that is used with the converter (Type_NP4H-CVU) to connect a personal computer loade...

No, you cannot. Use the dedicated loader cable (Type_NW0H-CA3). Show Detail
- No：1511
- Displayed Date：2023/04/25 19:00
Please tell me how to register a T-link model of UG (or V Series) as a POD in the system definition.

Select a T-link capsule and set the numbers of input/output words. By default, a POD requires one word for input and one word for output. Show Detail
- No：1438
- Displayed Date：2023/04/25 19:00
Is communication possible with the UI4 type not supported based on the manual description of the SX communication middleware (Type_ NP4N-MDLW)?

UI4 is not supported by the specification with the VB automation interface. Meanwhile, UI4 is supported by the custom interface specification. Show Detail
- No：1381
- Displayed Date：2023/04/25 19:00
When a remote terminal master (NP1L-RM1) has been registered in 1-to-N or N-to-N mode in the system definition, can I register a remote device as '...

The communication specification of the remote master does not control remote devices by the station No. Therefore, you cannot register remote devices as 'No ... Show Detail
- No：1486
- Displayed Date：2023/04/25 19:00
I cannot download a project to the user ROM card inserted in the CPU. What is a possible cause?

This problem is probably caused by the following reasons: [For SPH300/2000/3000 series] 1) The CPU mode selection switch is not set at the 'UROM-TERM' pos... Show Detail
- No：1528
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 13:47
Can I upload a definition file downloaded from a configurator to NP1L-PD1/PD2?

No, you cannot upload a definition file. So, it is very important to keep backup of Definition file on PC side. Show Detail
- No：1468
- Displayed Date：2023/04/25 19:00
When I try to register a remote I/O master module using the I/O extension function in a multi-CPU configuration in the system definition, an error ...

No, you cannot use the I/O extension function in a multi-CPU configuration. Register a remote I/O master module in the normal mode or extension mode in a... Show Detail
- No：1651
- Displayed Date：2023/04/25 19:00
I attempted to clear the memory in a CPU with the 'Clear' command for online operations, however, I got a message saying 'Clearing failed' and coul...

There is a possibility of mismatch between the project in the user ROM card and the CPU memory. On the 'Failure diagnosis' dialog, check the 'Resource inform... Show Detail
- No：1660
- Displayed Date：2023/04/25 19:00
The loader connector of SPH series CPU modules has been changed into RJ45 connector. Can I use an RS-232C/422 converter for personal computer loade...

No, you cannot use NW0H-CNV. The RS-232C/422 converter for personal computer loaders (Type_NW0H-CNV) needs to be supplied power from the PLC side, however, t... Show Detail
- No：1529
- Displayed Date：2023/04/25 19:00
When I use the SX communication middleware (Type_ NP4N-MDLW) and specify (_) in the access path during the item registration for the client, Errno=...

Move to the item ID without using the access path on the client side (D_). Show Detail
- No：1556
- Displayed Date：2023/04/25 19:00

1-10 of Total 11

Info & News

To Top of Page

PKSHA FAQ logo

Support tool

Regional Websites

About Us

Products & Solutions

Investor Relations

Sustainability