No, you can't. The relationship between i, which is the sensor output current, and i1 and i2, which are the CH input cu

Yes, it is generally possible. However, be sure to use compensating leads also for wiring to the recorder. Some recorde

Yes, you can. Note, however, that the input impedance reduces to half. Pay attention to the drive ability of the sensor.

For an analog input range (1 to 5 V or 4 to 20 mA), a line breakage detection function is provided. An input voltage of

Latest FAQ

GLOBAL

11-14 of Total 14

≪ 2 / 2page ≫

I will use the analog current input module. Can I input a single input signal to two CHs of the module simultaneously (in parallel) to use them?

No, you can't. The relationship between i, which is the sensor output current, and i1 and i2, which are the CH input currents of the PLC, is expressed as i ... Show Detail
- No：1603
- Displayed Date：2023/04/25 19:00
Is it possible to connect a recorder in parallel with signal input terminals of the thermocouple input module?

Yes, it is generally possible. However, be sure to use compensating leads also for wiring to the recorder. Some recorders may not permit connection dependi... Show Detail
- No：1420
- Displayed Date：2023/04/25 19:00
I will use the analog voltage input module. Can I input a single input signal to two CHs of the module simultaneously (in parallel) to use them?

Yes, you can. Note, however, that the input impedance reduces to half. Pay attention to the drive ability of the sensor. Show Detail
- No：1622
- Displayed Date：2023/04/25 19:00
I understand that an analog input module (Type_ NP1AXH4-MR, etc.) has a signal line breakage detection function. How does it work?

For an analog input range (1 to 5 V or 4 to 20 mA), a line breakage detection function is provided. An input voltage of 0.92 V or lower for the 1 to 5 V ran... Show Detail
- No：1316
- Displayed Date：2023/04/25 19:00

11-14 of Total 14