It is not possible for the user to restore the factory setting. The module will have to be returned to the factory for i

It is possible as long as the protocol is UDP/IP. In the M_OPEN FB, specify 255.255.255.255 as the IP address to be set

The SPH system automatically inherits information such as the communication ports and reopening processing is not requir

Input an arbitrary address. This setting is ignored for the unpassive mode.

The amounts of data transmitted or received are not limited as R_WRITE instruction/R_READ instruction but by the capacit

The IP address of the Ethernet module will become effective when the power supply is turned off once and then turned on

The IP address and port standard No. of the self station of the Ethernet module are stored in the internal ROM of the Et

The SX does not allow the use of a single SPORT_NO (range_ 1 to 127) for multiple connections simultaneously. When you w

(1) Standard CPU_ Access takes place when tasks end (synchronized with tasks). (2) High-performance CPU_ Access takes p

It is possible with the Ethernet module software version V36 or later by using the F_READ (read)/F_WRITE (write) FB. Af

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC > SPH > Communication (Ethernet)

Latest FAQ

When I use the Ethernet module (NP1L-ET1), can I use a same message port No. (SPORT_NO) to establish multiple connections (use multiple M_OPEN)?
I use the Ethernet module (NP1L-ET1/ET2) and using communication FB (M_OPEN). M_OPEN sets two ports of RPORT_NO and SPORT_NO. Does this mean that o...
When I forget the IP address of the WEB module (Type_ NP1L-WE1), can I change the IP from an external network?
During loader command communication of Ethernet, a port is closed after it has not been accessed from a personal computer for a certain period of t...
I use the Ethernet module (Type_NP1L-ET1). Is the IP address assigned automatically?

GLOBAL

Search by category

Keyword Search

FAQ within [ Communication (Ethernet) ]

1-10 of Total 25

≪ 1 / 3page ≫

I have lost the 'IP address' set with the WEB module (Type_ NP1L-WE1). How can I restore the factory setting?

It is not possible for the user to restore the factory setting. The module will have to be returned to the factory for initialization for a fee. Contact ou... Show Detail
- No：1409
- Displayed Date：2023/04/25 19:00
Is broadcast communication via Ethernet possible?

It is possible as long as the protocol is UDP/IP. In the M_OPEN FB, specify 255.255.255.255 as the IP address to be set for the 'communication destination s... Show Detail
- No：1415
- Displayed Date：2023/04/25 19:00
I use an Ethernet module (Type_ NP1L-ET□) in a redundant system. Is processing such as reopening of the Ethernet required at the time of redundancy...

The SPH system automatically inherits information such as the communication ports and reopening processing is not required. Show Detail
- No：1292
- Displayed Date：2023/04/25 19:00
I understand that when data are received via an Ethernet network in the TCP/IP unpassive mode, requests from multiple nodes can be accepted. How ca...

Input an arbitrary address. This setting is ignored for the unpassive mode. Show Detail
- No：1378
- Displayed Date：2023/04/25 19:00
I want to read and write memory blocks with loader commands by using Ethernet to connect between SX. Is there any limitation to the amounts of data...

The amounts of data transmitted or received are not limited as R_WRITE instruction/R_READ instruction but by the capacity of the memory from/to which data ar... Show Detail
- No：1324
- Displayed Date：2023/04/25 19:00
The D300win cannot connect to the SX via the Ethernet module.

The IP address of the Ethernet module will become effective when the power supply is turned off once and then turned on again after the module driver is dow... Show Detail
- No：1434
- Displayed Date：2023/04/25 19:00
After I replaced an Ethernet module (Type_NP1L-ET1/ET2), it cannot communicate with the target device. What is a possible cause?

The IP address and port standard No. of the self station of the Ethernet module are stored in the internal ROM of the Ethernet module. After replacing an Eth... Show Detail
- No：1590
- Displayed Date：2023/04/25 19:00
When I use the Ethernet module (NP1L-ET1), can I use a same message port No. (SPORT_NO) to establish multiple connections (use multiple M_OPEN)?

The SX does not allow the use of a single SPORT_NO (range_ 1 to 127) for multiple connections simultaneously. When you want to connect multiple ports, use a ... Show Detail
- No：1668
- Displayed Date：2023/04/25 19:00
I use an Ethernet module (Type_ NP1L-ET1/ET2) to read/write data from/to a PC in the loader command communication mode. At what time are data read ...

(1) Standard CPU_ Access takes place when tasks end (synchronized with tasks). (2) High-performance CPU_ Access takes place when a request is generated rega... Show Detail
- No：1300
- Displayed Date：2023/04/25 19:00
Is it possible to read and write the IP address and port reference number of an Ethernet module (Type_ NP1L-ET1) by using a user application?

It is possible with the Ethernet module software version V36 or later by using the F_READ (read)/F_WRITE (write) FB. After writing, the power (or reset) o... Show Detail
- No：1370
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 15:42

1-10 of Total 25

Info & News

To Top of Page

PKSHA FAQ logo

Communication (Ethernet)

Regional Websites

About Us

Products & Solutions

Investor Relations

Sustainability