You can use it as a standard base board by setting its station No. to '00.' In this case, you also need to set the syste

Usually, set the CPU No. to 0. The CPU No. 0 works as a master of an SX bus system. In a multi-CPU system or a CPU redu

The equivalent data is retained for one default task during switching and the standby CPU starts execution from the begi

The LG terminal is a line filter ground terminal in the power supply module. It is intended for guiding any external noi

Latest FAQ

GLOBAL

31-34 of Total 34

≪ 4 / 4page ≫

Can I use a base board with station No. setup function (Type_ NP1B*-**S) as a standard base board (without 'S' at the end of type code)?

You can use it as a standard base board by setting its station No. to '00.' In this case, you also need to set the system definition of the loader designed f... Show Detail
- No：1531
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 13:50
A CPU module has a rotary switch (0 to F) for setting the CPU No. on its front. What CPU No. should I set?

Usually, set the CPU No. to 0. The CPU No. 0 works as a master of an SX bus system. In a multi-CPU system or a CPU redundant system which uses multiple CPU ... Show Detail
- No：1504
- Displayed Date：2023/04/25 19:00
How does the redundant system handle tasks being executed when the operation is switched from an operating CPU to a standby CPU?

The equivalent data is retained for one default task during switching and the standby CPU starts execution from the beginning of the task. Show Detail
- No：1530
- Displayed Date：2023/04/25 19:00
What is the difference between the LG and FG terminals of the power supply module (Type_ NP1S-22)?

The LG terminal is a line filter ground terminal in the power supply module. It is intended for guiding any external noise produced in the power supply or sw... Show Detail
- No：1374
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 10:52