You can order sulfurized gas-resistant models by adding /Z4 at the end of product type code of the MICREX-SX SPH. Or, co

The standard MICREX-SX SPH models have been designed for use in tropical wetlands. Therefore, all you need to do is t

When station number '0' is set on the servo, the station number set on the loader becomes effective. If, however, you w

Modules that use the processor bus, such as the P/PE link and FL-net modules, need be mounted on the slot equipped with

Latest FAQ

GLOBAL

1-4 of Total 4

≪ 1 / 1page ≫

I want MICREX-SX SPH models designed to resist sulfurized gas.

You can order sulfurized gas-resistant models by adding /Z4 at the end of product type code of the MICREX-SX SPH. Or, contact your Fuji Electric sales repres... Show Detail
- No：1425
- Displayed Date：2023/04/25 19:00
I want MICREX-SX SPH models adapted to tropical wetlands.

The standard MICREX-SX SPH models have been designed for use in tropical wetlands. Therefore, all you need to do is to order standard models. Show Detail
- No：1287
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 14:17
The system using a servo directly connected to the SX bus does not start. I confirmed that the system configuration definition is correct.

When station number '0' is set on the servo, the station number set on the loader becomes effective. If, however, you want to use the servo for fail-soft st... Show Detail
- No：1594
- Displayed Date：2023/04/25 19:00
Are there any restrictions on the mounting position of the I/O modules and communication modules on the base? I'd like to place the communication m...

Modules that use the processor bus, such as the P/PE link and FL-net modules, need be mounted on the slot equipped with the processor bus. Other communicati... Show Detail
- No：1673
- Displayed Date：2023/04/25 19:00