What is the replacement for SPB (or SPE) ?

MICREX-SX series SPF is the replacement for SPB (or SPE). Show Detail

I used up differential relay memory. Can I create differential instructions by an application program?

You can use the following program as an alternative. When you turn on the differential command 'M0,' the differential output 'M2' turns ON for one scan. ... Show Detail

I bought a USB 3.0 cable (A-B type) to connect to FLT-ASFKA. However, I cannot connect them.

FLT-ASFKA is equipped with a USB2.0 (B type) connector. The connecter shape is different between USB 3.0 (B type) and a USB 2.0 (B type). Purchase a USB 2.0 ... Show Detail

The loader connector of SPH series CPU modules has been changed into RJ45 connector. Can I use an RS-232C/422 converter for personal computer loade...

No, you cannot use NW0H-CNV. The RS-232C/422 converter for personal computer loaders (Type_NW0H-CNV) needs to be supplied power from the PLC side, however, t... Show Detail

When connecting devices on T-link, do I have to install a T-link master at the starting point (either end) of the connection configuration?

You can install a T-link master (processor part in the case of MICREX-F series) at any position on the T-link transmission line. Show Detail

I use the pulse train output positioning control module (Type_ NP1F-HP2). Please tell me the rated voltage/current of the pulse output and control ...

Both the pulse output and control output are open collector outputs. They should be used within the following ranges (1) Pulse output_ 30 V DC, 40 mA or less... Show Detail

Do addresses of T-link devices (slave stations) connected to T-link need to be consecutive?

No, they do not need to be consecutive. If there are a lot of unused addresses, it may be better to assign addresses at some intervals for the future expa... Show Detail

Can I perform an offline simulation of a project created in Expert (D300win) and screen data of MONITOUCH?

Yes, you can. The SXPLC simulation function is supported by V3.0.14 or later version of Expert (D300win). Use the SXPLC simulator and SOFT MONITOUCH TE... Show Detail

When I use the Ethernet module (NP1L-ET1), can I use a same message port No. (SPORT_NO) to establish multiple connections (use multiple M_OPEN)?

The SX does not allow the use of a single SPORT_NO (range_ 1 to 127) for multiple connections simultaneously. When you want to connect multiple ports, use a ... Show Detail

I attempted to clear the memory in a CPU with the 'Clear' command for online operations, however, I got a message saying 'Clearing failed' and coul...

There is a possibility of mismatch between the project in the user ROM card and the CPU memory. On the 'Failure diagnosis' dialog, check the 'Resource inform... Show Detail