You can order sulfurized gas-resistant models by adding /Z4 at the end of product type code of the MICREX-SX SPH. Or, co

When SX-Programmer Expert (D300win) was upgraded to V3.3.2.0, the 'IP address and gateway setting definition' was added

The SX-Programmer Expert supports MODBUS communication (master function) using an FB. Communication with a MODBUS slave

There is a high-capacity battery for SPH300 (Type_ NP8P-BTS). Its battery capacity (approximately 2700 mA) is about 2.7

Bit data are of the BOOL type, 16-bit data the WORD type and 32-bit data the DWORD type.

(1) Standard CPU_ Access takes place when tasks end (synchronized with tasks). (2) High-performance CPU_ Access takes p

The SX does not allow the use of a single SPORT_NO (range_ 1 to 127) for multiple connections simultaneously. When you w

When the memory with a retain attribute is corrupted, the CPU clears the memory and operates in nonfatal fault condition

If the CPU supports user ROM (CF or SD card), you can do it by sending the program data for operation to the site by e-m

Yes, the StandardV3 loader has the function to change the CPU model. Use the 'Model Change' command in the 'Project' me

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC

Latest FAQ

I creat user FB in StandardV3, and defined input/output parameter as word (WV). Can I directly access any bit within this parameter WV?
When I write parameter to LonWorks module (NP1L-LW1) using support tool for a LonWorks (NP4N-LNDF), what is the required cable?
When I set the high-speed counter module (NP1F-HC2) to the preset operation mode of the multi-functional counter FB, the preset is disabled in the ...
We share the D300win and other PLC engineering tool software among several people. Do we need to purchase the software for each person?
Are there any restrictions on the mounting position of the I/O modules and communication modules on the base? I'd like to place the communication m...

GLOBAL

Search by category

Keyword Search

FAQ within [ PLC ]

331-340 of Total 398

≪ 34 / 40page ≫

I want MICREX-SX SPH models designed to resist sulfurized gas.

You can order sulfurized gas-resistant models by adding /Z4 at the end of product type code of the MICREX-SX SPH. Or, contact your Fuji Electric sales repres... Show Detail
- No：1425
- Displayed Date：2023/04/25 19:00
- Category： Others
I use SPH2000. When I upgraded SX-Programmer Expert (D300win) to a newer version, a comparison between the CPU and system configurations resulted i...

When SX-Programmer Expert (D300win) was upgraded to V3.3.2.0, the 'IP address and gateway setting definition' was added to accommodate the function addition ... Show Detail
- No：1417
- Displayed Date：2023/04/25 19:00
- Category： Support tool (D300win)
Does an RS-485 communication module (Type_ NP1L-RS1/RS4/RS5, etc.) support the MODBUS procedure?

The SX-Programmer Expert supports MODBUS communication (master function) using an FB. Communication with a MODBUS slave device is possible by using SPH_CP... Show Detail
- No：1380
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 15:45
- Category： Communication (Others)
Is there a battery available with a longer backup time than the backup battery for SPH (Type_ NP8P-BT)?

There is a high-capacity battery for SPH300 (Type_ NP8P-BTS). Its battery capacity (approximately 2700 mA) is about 2.7 times that of the backup battery supp... Show Detail
- No：1360
- Displayed Date：2023/04/25 19:00
- Category： Accessory
I am using D300win to write a program. Is there any fixed data type for direct address variables?

Bit data are of the BOOL type, 16-bit data the WORD type and 32-bit data the DWORD type. Show Detail
- No：1357
- Displayed Date：2023/04/25 19:00
- Category： Support tool (D300win)
I use an Ethernet module (Type_ NP1L-ET1/ET2) to read/write data from/to a PC in the loader command communication mode. At what time are data read ...

(1) Standard CPU_ Access takes place when tasks end (synchronized with tasks). (2) High-performance CPU_ Access takes place when a request is generated rega... Show Detail
- No：1300
- Displayed Date：2023/04/25 19:00
- Category： Communication (Ethernet)
When I use the Ethernet module (NP1L-ET1), can I use a same message port No. (SPORT_NO) to establish multiple connections (use multiple M_OPEN)?

The SX does not allow the use of a single SPORT_NO (range_ 1 to 127) for multiple connections simultaneously. When you want to connect multiple ports, use a ... Show Detail
- No：1668
- Displayed Date：2023/04/25 19:00
- Category： Communication (Ethernet)
When the retain memory (memory for data backup with a battery) of the CPU module of the MICREX-SX Series SPH is corrupted, how does the CPU module ...

When the memory with a retain attribute is corrupted, the CPU clears the memory and operates in nonfatal fault condition. If the power is reset again in this... Show Detail
- No：1611
- Displayed Date：2023/04/25 19:00
- Category： Main unit
There is no loader at the site. Is there any way to change the program?

If the CPU supports user ROM (CF or SD card), you can do it by sending the program data for operation to the site by e-mail or another method and then transf... Show Detail
- No：1592
- Displayed Date：2023/04/25 19:00
- Category： Main unit
Does the StandardV3 loader have the function to change the CPU model?

Yes, the StandardV3 loader has the function to change the CPU model. Use the 'Model Change' command in the 'Project' menu. Note that some higher models can... Show Detail
- No：1506
- Displayed Date：2023/04/25 19:00
- Category： Support tool (Standard)