Yes, you can connect MICREX-F series and SX series P-link modules, and communicate between them. * For the connection a

In MICREX-SX, a scan list is automatically created by registering the remote I/O to be connected to the master module in

The Standard Loader (V2.0.3.0 or later) supports SC instruction of the same specification as that of the MICREX-F Series

There are two ways to connect a USB port of a personal computer and a CPU: 1) Connect to the USB port of the CPU (direc

One M_OPEN consumes one port of SPORT_NO, which is the local port. RPORT_NO is the port of the other end of the commun

Yes, it is. The bit arrangement (weighting) is opposite between the SX Series and F Series. - SX Series_ LSB_ Bit 0

This only stops the operating CPU and the operation is not switched to the standby CPU.

You can use it provided that the system is a single-unit system (configured with one base only). Connect the connectors

You can install the SPF series main unit and each expansion unit without space between them.

The following analog input modules have the moving average function. 1) For the following models, the moving average f

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC

Latest FAQ

I creat user FB in StandardV3, and defined input/output parameter as word (WV). Can I directly access any bit within this parameter WV?
When I write parameter to LonWorks module (NP1L-LW1) using support tool for a LonWorks (NP4N-LNDF), what is the required cable?
When I set the high-speed counter module (NP1F-HC2) to the preset operation mode of the multi-functional counter FB, the preset is disabled in the ...
We share the D300win and other PLC engineering tool software among several people. Do we need to purchase the software for each person?
Are there any restrictions on the mounting position of the I/O modules and communication modules on the base? I'd like to place the communication m...

GLOBAL

Search by category

Keyword Search

FAQ within [ PLC ]

321-330 of Total 398

≪ 33 / 40page ≫

Can I connect MICREX-F series and SX series P-link modules via P-link?

Yes, you can connect MICREX-F series and SX series P-link modules, and communicate between them. * For the connection and communication methods, see 'Sectio... Show Detail
- No：1460
- Displayed Date：2023/04/25 19:00
- Category： Communication (Others)
With the DeviceNet master module (Type_ NP1L-DN1), how can I create a scan list and register it with the master module?

In MICREX-SX, a scan list is automatically created by registering the remote I/O to be connected to the master module in the system configuration definitions... Show Detail
- No：1346
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 15:35
- Category： Communication (Others)
Does the SPH Series have SC instruction (step control instruction)?

The Standard Loader (V2.0.3.0 or later) supports SC instruction of the same specification as that of the MICREX-F Series. Show Detail
- No：1288
- Displayed Date：2023/04/25 19:00
- Category： Application
I have connected the SX series CPU and the loader PC via USB. I have installed the USB driver and configured the communication settings, but commun...

There are two ways to connect a USB port of a personal computer and a CPU: 1) Connect to the USB port of the CPU (directly connected to the USB cable). 2) ... Show Detail
- No：1654
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 14:03
- Category： Support tool
I use the Ethernet module (NP1L-ET1/ET2) and using communication FB (M_OPEN). M_OPEN sets two ports of RPORT_NO and SPORT_NO. Does this mean that o...

One M_OPEN consumes one port of SPORT_NO, which is the local port. RPORT_NO is the port of the other end of the communication seen from the SX. Show Detail
- No：1643
- Displayed Date：2023/04/25 19:00
- Category： Communication (Ethernet)
I heard that the bit arrangement is opposite between the MICREX-SX Series and MICREX-F Series. Is this true?

Yes, it is. The bit arrangement (weighting) is opposite between the SX Series and F Series. - SX Series_ LSB_ Bit 0 MSB_ Bit 15 (D300win) Bi... Show Detail
- No：1618
- Displayed Date：2023/04/25 19:00
- Category： Application
What happens when I set the key switch of the operating CPU to STOP while using the redundancy function of the SPH300? Is the operation switched t...

This only stops the operating CPU and the operation is not switched to the standby CPU. Show Detail
- No：1588
- Displayed Date：2023/04/25 19:00
- Category： Main unit
I don't have the SX bus loop-back plug (Type_ NP8B-BP). Can I use the SX bus cable instead?

You can use it provided that the system is a single-unit system (configured with one base only). Connect the connectors at both ends of the cable to IN and ... Show Detail
- No：1543
- Displayed Date：2023/04/25 19:00
- Category： Accessory
How much space is necessary between the SPF series main unit and each expansion unit?

You can install the SPF series main unit and each expansion unit without space between them. Show Detail
- No：1517
- Displayed Date：2023/04/25 19:00
- Category： Main unit
Is there an analog module that supports the moving average function?

The following analog input modules have the moving average function. 1) For the following models, the moving average function can be set by switch setting ... Show Detail
- No：1493
- Displayed Date：2023/04/25 19:00
- Category： I/O