No, there isn't. Receive the external power supply as an external input to detect the status.

No, it is not possible. Only one program can be stored.

No, it doesn't. A power supply module may occupy two slots (Type_ NP1S-22, NP1S-42) or one slot (Type_ NP1S-81, NP1S-91

Check the following system memory. (1) Configuration information %MW10.52 to %MW10.67 (WSM52 to 67) (2) Configuratio

Latest FAQ

GLOBAL

31-34 of Total 34

≪ 4 / 4page ≫

Is there an RAS that detects an error of the external power supply used for an I/O module?

No, there isn't. Receive the external power supply as an external input to detect the status. Show Detail
- No：1388
- Displayed Date：2023/04/25 19:00
Can I store multiple programs in the user ROM card (CF or SD) ?

No, it is not possible. Only one program can be stored. Show Detail
- No：1298
- Displayed Date：2023/04/25 19:00
I mounted the power supply module (Type_ NP1S-22) on the base board (Type_ NP1BS-06). The connector at the far left of the base board is not used. ...

No, it doesn't. A power supply module may occupy two slots (Type_ NP1S-22, NP1S-42) or one slot (Type_ NP1S-81, NP1S-91). The connector at the far left... Show Detail
- No：1340
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 15:34
I use the hot plug base board with station No. setup function (Type_NP1BS-13D). When I remove a module, how can I identify the removed module in D3...

Check the following system memory. (1) Configuration information %MW10.52 to %MW10.67 (WSM52 to 67) (2) Configuration fault information %MW10.68 to %MW1... Show Detail
- No：1482
- Displayed Date：2023/04/25 19:00

31-34 of Total 34