It takes place only when data are received from an external device.

It occurs when any of the overrun, parity and framing errors is detected in the serial port of a general-purpose communi

When the P-link module is specified as 'unimplemented' and no P-link module exists in the system, attempting to access t

Latest FAQ

When I write parameter to LonWorks module (NP1L-LW1) using support tool for a LonWorks (NP4N-LNDF), what is the required cable?
When using a communication module (NP1L-RS1/RS2/RS3/RS4/RS), the FB outputs R_STS 'C0' (Hardware error detected) during receiving. In this case, ho...
I use DeviceNet interface module (NP1L-RD1) under DeviceNet master (NP1L-DN1). How can I specify NP1L-RD1 in the system definition?
In the communication module (NP1L-RS1/RS2/RS3/RS4/RS5), is it possible to change communication parameter such as fixed length to variable length af...
With the FL-net module (NP1L-FL1/FL2/FL3), is there any way to confirm that the data sent from the node-A have actually been received by the node-B?

GLOBAL

51-53 of Total 53

≪ 6 / 6page ≫

When does the standard expansion FB for communication_ Cfrp2 refresh the port status in the structure variable_ RAS?

It takes place only when data are received from an external device. Show Detail
- No：1400
- Displayed Date：2023/04/25 19:00
With the general-purpose communication module (Type_ NP1L-RS□), in what cases does 'C0_ Hardware error detected during receiving' occur?

It occurs when any of the overrun, parity and framing errors is detected in the serial port of a general-purpose communication module. Show Detail
- No：1328
- Displayed Date：2023/04/25 19:00
In an SPH system, I specified the P-link module as 'unimplemented' and the program execution time was extended. Why?

When the P-link module is specified as 'unimplemented' and no P-link module exists in the system, attempting to access the P-link memory using a contact, coi... Show Detail
- No：1355
- Displayed Date：2023/04/25 19:00

51-53 of Total 53