How to overlay one switch on another on the screen
As a rule, when placing switches, do not overlay one switch on another. When switches are overlaid, the switch placed on top is valid. The switch placed un... Show Detail
MONITOUCH does not switch from the RUN screen to the Main Menu screen.
Press the [SYSTEM] switch, and when the switch menu is displayed press the [F1] (MODE) switch. [If the switch menu is not displayed when the [SYSTEM] sw... Show Detail
<TELLUS-HMI> I use storage or SRAM on the V series. How about in the TELLUS-HMI mode?
The data is saved in the PC. The data is stored in folders on your PC. Storage directory depends on the setting in [Optionn]→[Main 1]→[Generate folder at... Show Detail
The graph of a trend part (Display Mode: Real Time Display) is not displayed.
<Causes> No data is stored in the device memory address for each graph number. The number of points to plot is not specified in the control device me... Show Detail
<Cause> The trend graph is not redrawn. <Solution> The graph data once displayed is not updated unless the redraw command is specified. To ... Show Detail
Pressing the reset switch does not clear history data.
<Causes> The switch is not pressed twice. The switch is disabled according to the interlock setting. <Solutions> Press the "Reset" switch... Show Detail
How to save the sampling data to CSV files by date
Two methods are available. Follow the steps below. [To output by setting] Select [System Setting] →[Buffering Area Setting] on the V-SFT editor and check [... Show Detail
Is pressing two switches at the same time allowed?
This differs depending on the touch switch type. Matrix switch type: Two-switch pressing available Analog switch type: Two-switch pressing not available ... Show Detail
<TELLUS-HMI> Connection with MITSUBISHI Q series via Ethernet unit cannot be established.
Check the setting below. Screen program settings For V-SFT-6: [System Setting] > [Hardware Setting] For V-SFT-5: [System Setting] > [Device Connection... Show Detail
You can change it to zero-suppress display from [Display Environment] menu. Follow the step below. Go to [View] > [Display Environment]. Check ... Show Detail
51-60 of Total 315