This error is displayed on the V series when an error is detected in the transferred screen data. <Solutions> Re

This error is displayed when the V series does not receive an answer from a connected device (PLC, temperature controlle

This error is displayed when the SRAM area is not formatted on the V10/V9 series unit. <Causes> The following c

The "error code" in this message indicates errors occurring on the connected device side. Frequently occurring errors ar

This error occurs when using a V8 compatible setting (*) on a V10/V9 series unit. At the start of communication, the V10

This error occurs when a TCP connection cannot be established when connecting to a network device using TCP/IP. <Ca

This error may be displayed on the configuration software V-SFT when data is transferred. When the PC port cannot be ope

Check the [Waiting time for structure check] and [Fail-soft operation setting] settings on the SX side. If the [Waiting

This error is displayed on the V series when simulator communication is not established correctly between the V series a

An unavailable device memory address is set or the available device memory range is exceeded. Causes The causes are li

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > HMI > V10/V9 series > Error

Latest FAQ

GLOBAL

Search by category

Keyword Search

FAQ within [ Error ]

1-10 of Total 25

≪ 1 / 3page ≫

Screen Program Error "Error : XX (XX : XXX)"

This error is displayed on the V series when an error is detected in the transferred screen data. <Solutions> Read the error code as shown below. F... Show Detail
- No：4550
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:25
Communication Error "Timeout"

This error is displayed when the V series does not receive an answer from a connected device (PLC, temperature controller, etc.) within the predetermined tim... Show Detail
- No：4547
- Displayed Date：2025/12/01 13:47
Screen Data Error "Error: 161 (SRAM:x)"

This error is displayed when the SRAM area is not formatted on the V10/V9 series unit. <Causes> The following conditions cause this error. A.When ... Show Detail
- No：4568
- Displayed Date：2025/12/01 13:46
Communication Error "Error code received"

The "error code" in this message indicates errors occurring on the connected device side. Frequently occurring errors are: the PLC device memory address spec... Show Detail
- No：4548
- Displayed Date：2025/12/01 13:46
"Screen No. Error"

This error occurs when using a V8 compatible setting (*) on a V10/V9 series unit. At the start of communication, the V10/V9 series initially displays the sc... Show Detail
- No：4565
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:29
A TCP connection cannot be established.

This error occurs when a TCP connection cannot be established when connecting to a network device using TCP/IP. <Cause> The LAN cable is not connec... Show Detail
- No：4569
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:49
"The port cannot be opened."

This error may be displayed on the configuration software V-SFT when data is transferred. When the PC port cannot be opened, this error occurs. [When "U... Show Detail
- No：4555
- Displayed Date：2025/12/01 13:47
- Updated DTM：2025/12/15 10:32
When the MICREX-SX PLC is connected via the SX bus, the V10/V9 series unit encounters a communication error ("Time-Out") at startup.

Check the [Waiting time for structure check] and [Fail-soft operation setting] settings on the SX side. If the [Waiting time for structure check] setting is... Show Detail
- No：4564
- Displayed Date：2025/12/01 13:46
Communication Error "Simulator: Timeout", "Simulator: Link down"

This error is displayed on the V series when simulator communication is not established correctly between the V series and the PC. [Communication with a P... Show Detail
- No：4549
- Displayed Date：2025/12/01 13:47
Screen Data Error "Error:46"

An unavailable device memory address is set or the available device memory range is exceeded. Causes The causes are listed below. Device memory set in t... Show Detail
- No：4570
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:51