Error

  • Font Size
  • S
  • M
  • L

Search by category

Keyword Search

You can search two or more words separated by a space.

FAQ within [ Error ]

1-10 of Total 21

≪ 1 / 3page ≫

  • "Communication Error Received Code No. 05"

    [Communication with a PLC] Refer to the following FAQ page. "No：4708 Communication error "Error code received" [Communication with simulator] This err... Show Detail

    • No：4715
    • Displayed Date：2025/12/01 13:50

  • Communication error "Error code received"

    The "error code" in this message indicates errors occurring on the connected device side. Frequently occurring errors are: the PLC memory address specified ... Show Detail

    • No：4708
    • Displayed Date：2025/12/01 13:49
    • Updated DTM：2025/12/08 16:29

  • "Screen No. Error"

    At the start of communication, the V8/TS series initially displays the screen corresponding to the value specified for "n+2" in [Read Area]. "Screen No. Err... Show Detail

    • No：4710
    • Displayed Date：2025/12/01 13:50

  • Ethernet Error:205

    This error occurs when a TCP connection cannot be established when connecting to a network device using TCP/IP. <Cause> The LAN cable is not connec... Show Detail

    • No：4725
    • Displayed Date：2025/12/01 13:50

  • "Error : XX (XX : XXX)"

    This error is displayed on the V/TS series when an error is detected in the transferred screen data. <Solutions> Read the error code as shown below... Show Detail

    • No：4709
    • Displayed Date：2025/12/01 13:50

  • "The font file cannot be found."

    This error is displayed when Gothic fonts used in the screen data are not installed. <Solutions> Update the V-SFT editor to version 5 from our webs... Show Detail

    • No：4720
    • Displayed Date：2025/12/01 13:49

  • "Touch Switch is Active"

    <Cause> This error is displayed when the power is turned on while a touch switch is being pressed. <Solutions> Remove your finger from the s... Show Detail

    • No：4713
    • Displayed Date：2025/12/01 13:50

  • "Insert Storage in TS" "Insert CF Card in xx" (xx:V8 or V7)

    Though automatic program uploading upon power-on is enabled by screen configuration, no storage device(SD card, USB memory, CF card, etc.) is inserted in the... Show Detail

    • No：4714
    • Displayed Date：2025/12/01 13:49

  • "Error:161 (24:x)"

    This error is displayed when the SRAM area is not formatted on the V8/TS series unit. <Causes> The following conditions cause this error. A. Wh... Show Detail

    • No：4726
    • Displayed Date：2025/12/01 13:50
    • Updated DTM：2025/12/08 16:17

  • "The port cannot be opened."

    This error may be displayed on the configuration software V-SFT when data is transferred. Possible causes and solutions are given below. [When the transf... Show Detail

    • No：4718
    • Displayed Date：2025/12/01 13:50

1-10 of Total 21

Info & News

To Top of Page