"It is not possible to open this file because there is a function that is not able to use."
<Causes> The screen data you attempted to open includes a function not supported by the V-SFT version in use. <Solutions> Update the V-SFT v... Show Detail
In what way the screen is shifted? If the following functions are in use, screen shift is possible on the remote mode TELLUS but not on the monitored device... Show Detail
How to draw reference lines in a trend graph or trend sampling part
V-SFT Ver.6 [To draw four or less horizontal reference lines] Display the [Trend Graph] dialog and click [Contents]. Check a [Reference Line] to use and se... Show Detail
How to display overlap parts from the PLC (external)
There are four overlap part types. Normal overlap Call-overlap Multi overlap Global overlap In the case of external commands, the display method diffe... Show Detail
<Cause> When displaying a normal overlap or call-overlap part according to the status of the corresponding bit in read area "n + 1", this is recognize... Show Detail
How to give headings to logging data output to CSV files
Configure the settings below to give headings to data in CSV files. Click [System Setting] -> [Logging Server] (or [Alarm Server]) and select a block num... Show Detail
How to copy a screen from one file to another
There are two methods. Follow the steps below. [Method 1: Copy each item] Click [File]→[Comparing]. Enter filenames for [Comparison] (source) and ... Show Detail
I want to connect to MICREX-SX but "Communication Error: Error Code received " occurs.
This is an address error. An invalid device memory is set in the screen program. The causes are listed below. Cause 1: X/Y device memory, P/PE link, or ... Show Detail
<V-Server> Can I write to the same Excel file from several different loggings?
Yes. Show Detail
[Causes] WAV files or JPEG files are notstored in the correct folder. For WAV file replay, settings on a screen program is not correct. [Solutions] The loc... Show Detail
141-150 of Total 315