<V-Server> Is the number of the logging to register limited on V-Server?
It depends on the version of V-Server. Version Number of the logging to register Ver.2.0.0.3 or later No limitation Ver.1.0.0.0 - Ver.2.0.0.2 Up... Show Detail
The time and date is not displayed correctly.
The solutions vary depending on the screen data settings. Check the following settings. Setting location: V-SFT editor [System Setting]→[Unit Setting]→[... Show Detail
Communication between the temperature controller and the V series is slow (V7 series).
To speed up communications, try the following method. The condition can also be improved as described below. <Baud rate> Increase the communicatio... Show Detail
The data displayed in a trend graph is different from the most recent data in the PLC.
<Cause> The trend graph is not redrawn. <Solution> The graph data once displayed is not updated unless the redraw command is specified. To ... Show Detail
Pressing the reset switch does not clear history data.
<Causes> The switch is not pressed twice. The switch function is not set to [Reset]. The switch is disabled according to the interlock setting. ... Show Detail
How to shorten screen data transfer time (with screen data transfer cable: V-CP (serial connection))
The following methods are available. [Increase the baud rate] Select [Transfer]→[Communication Setting] or [Transfer]→[Download]→[Communication Setting] an... Show Detail
An error occurs in V-SFT when opening a screen program that connects to MICREX-SX
This page describes the following errors. Screen programs for SX Programmer Expert (D300Win) projects Not exist a work sheet/group. It is DDE communicatio... Show Detail
How to hide overlap parts from the screen while editing the base screen
Two methods are available. Follow the steps below. [Method 1: Right-click menu] Display the right-click menu on the screen, and click [Overlap Display]→[AL... Show Detail
Can I display previous trends/alarms on the HMI?
Yes, you can display previous databy the backup file (*.bin) generated inthe storagedevice. Follow the steps below to show previous data. E.g.) Alarm dis... Show Detail
What printers were verified compatibility?
Click here. Show Detail
91-100 of Total 315