There is a limit to the number of POUs that can be opened simultaneously_ 31 including 'Data 1,' 'Simulation' and 'AFB.'

The set value of the timer must be a 32-bit (double-word) value. Specify DM (double-word), not WM (single-word). The mem

1) By the mechanism of program conversion, unused FBs are also registered. However, FBs not used in the program ar

The '*' symbol on the ladder bus indicates a circuit being changed online. It will disappear when you transfer the chan

The Standard Loader does not support color printing.

To use the failure diagnosis function, you need to install '.NetFramework' on your computer. '.NET Framework2.0' is con

You can remove these warnings by deleting function blocks (FBs) that are not used in the program. Do either of the fol

Yes, it is possible. Input a memory address (DLxx) instead of an immediate value as the operand of the timer instruction

Timers of small numbers (T0 to T8191) are local timers (timers effective within the program only). To create timers tha

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC > Common to SX > Support tool (Standard)

Latest FAQ

I creat user FB in StandardV3, and defined input/output parameter as word (WV). Can I directly access any bit within this parameter WV?
When I defined array (example WL990[WL0]) as start addoress of FMOVE in StandardV2 loader, error was detected by error check. Why?
When comparing the project in CPU with that in the personal computer by Standard loader, a mismatch between the programs was detected. How can I fi...
When I tried to download a project to the CPU with StandardV3, an error message appeared saying 'The size of Zip file exceeds the capacity.' and th...
I converted a MICREX-F program to a MICREX-SX using StandardV3 loader. Contact and coil M8720 (TEMP0) which did not exist before conversion were cr...

GLOBAL

Search by category

Keyword Search

FAQ within [ Support tool (Standard) ]

1-10 of Total 38

≪ 1 / 4page ≫

When I use the Standard Loader (Type_ NP4H-SWN) to add 35 POUs under a program configuration and attempt to open the POUs, I can open up to the 28t...

There is a limit to the number of POUs that can be opened simultaneously_ 31 including 'Data 1,' 'Simulation' and 'AFB.' Show Detail
- No：1362
- Displayed Date：2023/04/25 19:00
When I used the Standard Loader (Type_ NP4H-SWN) to input a timer instruction and specified the WM area for indirectly specifying the timer set val...

The set value of the timer must be a 32-bit (double-word) value. Specify DM (double-word), not WM (single-word). The memory to use may be DX or DL, as well a... Show Detail
- No：1361
- Displayed Date：2023/04/25 19:00
Is it possible to use the SX control utility of D300win to back up a program written by using the Standard Loader (Type_ NP4H-SWN)?

Yes, it is possible. Show Detail
- No：1393
- Displayed Date：2023/04/25 19:00
1) When converting a program on Standard, about 100 FBs are registered in 'Function Blocks.' Are they all FBs being used? 2) Can I find out where a...

1) By the mechanism of program conversion, unused FBs are also registered. However, FBs not used in the program are not downloaded to the CPU, therefor... Show Detail
- No：1508
- Displayed Date：2023/04/25 19:00
With the Standard Loader (Type_ NP4H-SWN) version 2, what does '*' displayed on the ladder bus indicate?

The '*' symbol on the ladder bus indicates a circuit being changed online. It will disappear when you transfer the changed circuit to the PLC. Show Detail
- No：1609
- Displayed Date：2023/04/25 19:00
With the Standard Loader (Type_ NP4H-SWN) version 2, colors can be specified for local timers and counters. How can I color them in print?

The Standard Loader does not support color printing. Show Detail
- No：1332
- Displayed Date：2023/04/25 19:00
In StandardV3 loader, I can use the download and verification functions, but not the failure diagnosis function. How can I solve this problem?

To use the failure diagnosis function, you need to install '.NetFramework' on your computer. '.NET Framework2.0' is contained in the product CD. If your OS... Show Detail
- No：1513
- Displayed Date：2023/04/25 19:00
I have converted MICREX-F program to SX using StandardV3. After execute [Conversion All], many warning messages appear '*** (Function block (FB) na...

You can remove these warnings by deleting function blocks (FBs) that are not used in the program. Do either of the following methods: Method 1 1) After... Show Detail
- No：1655
- Displayed Date：2023/04/25 19:00
Is it possible to indirectly specify the timer set value with the Standard Loader (Type_ NP4H-SWN)?

Yes, it is possible. Input a memory address (DLxx) instead of an immediate value as the operand of the timer instruction. Show Detail
- No：1407
- Displayed Date：2023/04/25 19:00
When I was creating a program for the SPH Series with the Standard Loader (Type_ NP4H-SWN) and divided the program, the timer entered an error status.

Timers of small numbers (T0 to T8191) are local timers (timers effective within the program only). To create timers that are effective in other programs (g... Show Detail
- No：1437
- Displayed Date：2023/04/25 19:00

1-10 of Total 38

Info & News

To Top of Page

PKSHA FAQ logo

Support tool (Standard)

Regional Websites

About Us

Products & Solutions

Investor Relations

Sustainability