For device display in StandardV3, a maximum of 2048 rows can be displayed on one window. To display WM2048 and the follo

You can check the address range of the CPU by using the loader or in the user's manual. In the Standard loader, after c

By changing the zoom rate of the main screen displaying a program or data monitoring, the on-screen font size is also i

Version 2 is not based on the concept of online/offline switching. It is designed in such a way that you select online

To make the 'Use USB port' check box selectable, the USB driver for MICREX-SX must be installed on the PC in use. Insta

1) Double-click the 'Device' icon in the project view to open the device window. 2) Click the [Device Type] selection b

A normal timer instruction specifies the effective timer range in the unit used on the POU. Since the timer numbers (T0

Set the number of timers according to the number actually used. By simply specifying 8192 or a larger value as the time

1) Double-click the 'Device' icon in the project view to open the device window. 2) Click the [Device Type] selection b

The '*' symbol on the ladder bus indicates a circuit being changed online. It will disappear when you transfer the chan

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC > Common to SX > Support tool (Standard)

Latest FAQ

I creat user FB in StandardV3, and defined input/output parameter as word (WV). Can I directly access any bit within this parameter WV?
When I defined array (example WL990[WL0]) as start addoress of FMOVE in StandardV2 loader, error was detected by error check. Why?
When comparing the project in CPU with that in the personal computer by Standard loader, a mismatch between the programs was detected. How can I fi...
When I tried to download a project to the CPU with StandardV3, an error message appeared saying 'The size of Zip file exceeds the capacity.' and th...
I converted a MICREX-F program to a MICREX-SX using StandardV3 loader. Contact and coil M8720 (TEMP0) which did not exist before conversion were cr...

GLOBAL

Search by category

Keyword Search

FAQ within [ Support tool (Standard) ]

11-20 of Total 38

≪ 2 / 4page ≫

In the StandardV3, when I display devices for 'WM' by clicking [Device], WM0000 to WM2047 are displayed, however, WM2048 and the following addresse...

For device display in StandardV3, a maximum of 2048 rows can be displayed on one window. To display WM2048 and the following addresses, click the [Next page]... Show Detail
- No：1632
- Displayed Date：2023/04/25 19:00
I am creating a program using SX-Programmer Standard. How can I check the address range of the memory devices that can be used in a program?

You can check the address range of the CPU by using the loader or in the user's manual. In the Standard loader, after creating a project, you can check the ... Show Detail
- No：1480
- Displayed Date：2023/04/25 19:00
Can I increase the font size displayed on the Standard loader screen?

By changing the zoom rate of the main screen displaying a program or data monitoring, the on-screen font size is also increased or decreased. However, the S... Show Detail
- No：1501
- Displayed Date：2023/04/25 19:00
I cannot switch from online status to offline status with the Standard Loader (Type_ NP4H-SWN) version 2.

Version 2 is not based on the concept of online/offline switching. It is designed in such a way that you select online or offline when you open the screen. Show Detail
- No：1578
- Displayed Date：2023/04/25 19:00
Of the communication port settings (MICREX-SX) of the Standard Loader (Type_ NP4H-SWN), the 'Use USB port' check box cannot be selected.

To make the 'Use USB port' check box selectable, the USB driver for MICREX-SX must be installed on the PC in use. Install the USB driver (dedicated) conta... Show Detail
- No：1306
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 14:31
How can I display the list of device use status on Standard loaderV3

1) Double-click the 'Device' icon in the project view to open the device window. 2) Click the [Device Type] selection button (▼) and select a device the u... Show Detail
- No：1526
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 13:44
With the Standard Loader (Type_ NP4H-SWN), I cannot use a timer (T0) created on a different POU at a contact.

A normal timer instruction specifies the effective timer range in the unit used on the POU. Since the timer numbers (T0 to T8191) are treated as a local devi... Show Detail
- No：1544
- Displayed Date：2023/04/25 19:00
A global timer with the Standard Loader, T8192 or a larger value must be specified as the timer address. Do I need to set the number of timers as 8...

Set the number of timers according to the number actually used. By simply specifying 8192 or a larger value as the timer number, a global timer can be used. Show Detail
- No：1635
- Displayed Date：2023/04/25 19:00
How can I enter tags (device comments) in a batch on Standard loader V3?

1) Double-click the 'Device' icon in the project view to open the device window. 2) Click the [Device Type] selection button (▼) and select a device for w... Show Detail
- No：1527
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 13:45
With the Standard Loader (Type_ NP4H-SWN) version 2, what does '*' displayed on the ladder bus indicate?

The '*' symbol on the ladder bus indicates a circuit being changed online. It will disappear when you transfer the changed circuit to the PLC. Show Detail
- No：1609
- Displayed Date：2023/04/25 19:00