When SX-Programmer Expert (D300win) was upgraded to V3.3.2.0, the 'IP address and gateway setting definition' was added

The program memory, data memory and system definitions in the CPU can be saved to a PC as a data file by using the 'Back

(1) For Expert (D300win) No master control instruction is provided. This is because the MICREX-SX Series is dedicat

The MOVE function can be used to transfer data of the same array data type. You can also connect variables together wit

Yes, it is possible. Note, however, that the values are of the INT data type.

Create one project file. There are separate tasks for the respective CPUs and the assignment of POUs to tasks determine

With a CPU module of the SPH Series that supports user ROM cards (CF or SD), a user ROM card can be used to download a p

Project printing is optimized printing. The column width of a print is fixed and cannot be adjusted.

Unless you register the module in the system definition and set the I/O group in the CPU parameters, data monitoring is

When all the programs are downloaded into the CPU, the download history is not stored. However, when only a changed pro

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC > Common to SX

Latest FAQ

I creat user FB in StandardV3, and defined input/output parameter as word (WV). Can I directly access any bit within this parameter WV?
We share the D300win and other PLC engineering tool software among several people. Do we need to purchase the software for each person?
I use structure variables with the D300win. How each elements in structure assigned in memory?
I use the CPU module of Type NP1PS-32R/74R/117R/245R. When I create a new project, the displayed option is 'PS32/PS74/PS117/PS245' only. Which shou...
When I defined array (example WL990[WL0]) as start addoress of FMOVE in StandardV2 loader, error was detected by error check. Why?

GLOBAL

Search by category

Keyword Search

FAQ within [ Common to SX ]

71-80 of Total 127

≪ 8 / 13page ≫

I use SPH2000. When I upgraded SX-Programmer Expert (D300win) to a newer version, a comparison between the CPU and system configurations resulted i...

When SX-Programmer Expert (D300win) was upgraded to V3.3.2.0, the 'IP address and gateway setting definition' was added to accommodate the function addition ... Show Detail
- No：1417
- Displayed Date：2023/04/25 19:00
- Category： Support tool (D300win)
I am going to replace the CPU. Is there any way to save the current data retained at one time and apply them to the new CPU?

The program memory, data memory and system definitions in the CPU can be saved to a PC as a data file by using the 'Backup' function included in the 'SX cont... Show Detail
- No：1402
- Displayed Date：2023/04/25 19:00
- Category： Support tool
Can a master control instruction be used in the MICREX-SX Series?

(1) For Expert (D300win) No master control instruction is provided. This is because the MICREX-SX Series is dedicated to programmable logic controlle... Show Detail
- No：1389
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 13:17
- Category： Application
I want to transfer data collectively. Is there any block transfer instruction equivalent to that of the MICREX-F Series? If not, how can I transfer...

The MOVE function can be used to transfer data of the same array data type. You can also connect variables together without using MOVE. Data of differe... Show Detail
- No：1371
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 15:42
- Category： Application
Is it possible to use a variable for the initial value, end value and incremental value by using a 'FOR statement' of the ST language?

Yes, it is possible. Note, however, that the values are of the INT data type. Show Detail
- No：1337
- Displayed Date：2023/04/25 19:00
- Category： Application
The SPH300EX (Type_ NP1PS-74D) integrates two CPUs. Do I need to create separate project files for the respective CPUs?

Create one project file. There are separate tasks for the respective CPUs and the assignment of POUs to tasks determines the CPU to which the program is a... Show Detail
- No：1330
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 15:32
- Category： Support tool (D300win)
Can I change a PLC program without a programming tool?

With a CPU module of the SPH Series that supports user ROM cards (CF or SD), a user ROM card can be used to download a program to the CPU module. Show Detail
- No：1302
- Displayed Date：2023/04/25 19:00
- Category： Support tool
With the LD/FBD editor of D300win V3, I printed a project and the column width was very narrow. Is there any way to adjust the column width?

Project printing is optimized printing. The column width of a print is fixed and cannot be adjusted. Show Detail
- No：1284
- Displayed Date：2023/04/25 19:00
- Category： Support tool (D300win)
Does data monitoring of the I/O area require the module to be registered in the system definition?

Unless you register the module in the system definition and set the I/O group in the CPU parameters, data monitoring is disabled because no memory is reserve... Show Detail
- No：1581
- Displayed Date：2023/04/25 19:00
- Category： Support tool
I am using the StandardV3 loader. Can I check the download history to the CPU?

When all the programs are downloaded into the CPU, the download history is not stored. However, when only a changed program is downloaded (online program c... Show Detail
- No：1489
- Displayed Date：2023/04/25 19:00
- Category： Support tool (Standard)