Does the SX Series comply with the noise regulations of the FCC Standards?

For the SX Series, compliance with the FCC Standards is not confirmed. Compliance with the EMI regulations of the SX Series has been confirmed according to ... Show Detail

I create a program for the SPH by using the Standard Loader (Type_ NP4H-SWN). Is flicker relay memory available?

It is not provided as internal memory. You need to create the circuit shown in the attached diagram. The example shows a circuit in which M0 repeats ON and O... Show Detail

Are there any sample programs of various expansion FBs such as general-purpose communication that can be used for the Standard Loader (Type_ NP4H-S...

Yes, there are. When you install an expansion FB, sample programs are installed as a compressed project (extension *.Zpj) in a folder named 'SAMPLES' under... Show Detail

I use the hot plug base board with station No. Setup Function (Type_NP1BS-13D). When a module is removed, a nonfatal fault occurs. Please tell me h...

Check the following system memory. If %MX10.4.5 (SM45) 'I/O module error' is turned on, removal of a module may be the cause of the nonfatal fault. [Relat... Show Detail

How can I enter tags (device comments) in a batch on Standard loader V3?

1) Double-click the 'Device' icon in the project view to open the device window. 2) Click the [Device Type] selection button (▼) and select a device for w... Show Detail

Which CPU modules and versions support the use of NW0H-CA3 (loader connection cable) + NP4H-CVU (USB/RS-422 convertor)?

The following CPU modules and versions support the above. ・ NP1PH-08/16: V22 or later ・ NP1PS-32:V26 or later ・ NP1PS-32R/74R/117R:V29 or later ・ NP1PS-2... Show Detail

I am creating a program using SX-Programmer Standard. How can I check the address range of the memory devices that can be used in a program?

You can check the address range of the CPU by using the loader or in the user's manual. In the Standard loader, after creating a project, you can check the ... Show Detail

What is the meaning of EN and ENO of functions in Expert (D300win)?

The EN and ENO terminals of functions mean the start operation terminal and the operation result terminal, respectively. ・When the variable connected to the... Show Detail

I want to remotely monitor the status of the memory. Is it possible to use the SX control utility via an online adapter?

The Control Utility only supports the COM port and USB port and cannot be used. Show Detail

How are data of the BOOL type defined for an array assigned in the actual memory? (How about when an array of 32 data of the BOOL type is specified...

Of the array element Nos., [0] is assigned to the 0th bit and [31] to the 31st bit. Show Detail