Yes, it is. The bit arrangement (weighting) is opposite between the SX Series and F Series. - SX Series_ LSB_ Bit 0

No, there isn't. As the name ST (Structured Text) indicates, the ST language is most suitable for achieving structured

Unless you register the module in the system definition and set the I/O group in the CPU parameters, data monitoring is

Yes, it is possible. Method 1): You can use the 'Backup' function of the SX control utility function in D300win V3.1 o

This error occurs when the system configuration set by the loader software differs from the actual configuration. For ex

You can display the mismatch circuit in the program and differences using the 'Compare Projects' command of the Expert

Yes_ however, it is not recommended in terms of program reuse. It is better to use internal memory such as M and L by c

It can be used without any problem as long as the text (file names, variable names, POU names, etc.) created in Japanese

For the SX Series, compliance with the FCC Standards is not confirmed. Compliance with the EMI regulations of the SX Se

When the FALDIC-α se

Yes, there is a difference in system operation when control power supply for a servo amplifier is shut down. The ALPHA5

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC > Common to SX

Latest FAQ

I creat user FB in StandardV3, and defined input/output parameter as word (WV). Can I directly access any bit within this parameter WV?
We share the D300win and other PLC engineering tool software among several people. Do we need to purchase the software for each person?
I use structure variables with the D300win. How each elements in structure assigned in memory?
I use the CPU module of Type NP1PS-32R/74R/117R/245R. When I create a new project, the displayed option is 'PS32/PS74/PS117/PS245' only. Which shou...
When I defined array (example WL990[WL0]) as start addoress of FMOVE in StandardV2 loader, error was detected by error check. Why?

GLOBAL

Search by category

Keyword Search

FAQ within [ Common to SX ]

101-110 of Total 127

≪ 11 / 13page ≫

I heard that the bit arrangement is opposite between the MICREX-SX Series and MICREX-F Series. Is this true?

Yes, it is. The bit arrangement (weighting) is opposite between the SX Series and F Series. - SX Series_ LSB_ Bit 0 MSB_ Bit 15 (D300win) Bi... Show Detail
- No：1618
- Displayed Date：2023/04/25 19:00
- Category： Application
Is there any conditional statement for jump in the ST language?

No, there isn't. As the name ST (Structured Text) indicates, the ST language is most suitable for achieving structured programming. The concept of jump is ... Show Detail
- No：1428
- Displayed Date：2023/04/25 19:00
- Category： Application
Does data monitoring of the I/O area require the module to be registered in the system definition?

Unless you register the module in the system definition and set the I/O group in the CPU parameters, data monitoring is disabled because no memory is reserve... Show Detail
- No：1581
- Displayed Date：2023/04/25 19:00
- Category： Support tool
Is it possible to read the internal data of the SPH CPU to a file and display it on spreadsheet software such as Excel?

Yes, it is possible. Method 1): You can use the 'Backup' function of the SX control utility function in D300win V3.1 or later to save the internal data in ... Show Detail
- No：1606
- Displayed Date：2023/04/25 19:00
- Category： Support tool
When I started a MICREX-SX series PLC after downloading a program into it, a fatal fault occurred. The loader software says 'system construction er...

This error occurs when the system configuration set by the loader software differs from the actual configuration. For example, a defined module is not mount... Show Detail
- No：1649
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 14:07
- Category： Support tool
When comparing the project in CPU with that in the personal computer by Expert loader, a mismatch between the programs was detected. How can I find...

You can display the mismatch circuit in the program and differences using the 'Compare Projects' command of the Expert loader. For the operating procedure, ... Show Detail
- No：1663
- Displayed Date：2023/04/25 19:00
- Category： Support tool (D300win)
Is it possible to use the M/L area in the user FB with the Standard Loader (Type_ NP4H-SWN)?

Yes_ however, it is not recommended in terms of program reuse. It is better to use internal memory such as M and L by connecting them to the I/O terminals ... Show Detail
- No：1565
- Displayed Date：2023/04/25 19:00
- Category： Support tool (Standard)
Is it possible to use a project created with the Japanese version of D300win on an English OS?

It can be used without any problem as long as the text (file names, variable names, POU names, etc.) created in Japanese (double-byte codes) are all created ... Show Detail
- No：1353
- Displayed Date：2023/04/25 19:00
- Category： Support tool (D300win)
Does the SX Series comply with the noise regulations of the FCC Standards?

For the SX Series, compliance with the FCC Standards is not confirmed. Compliance with the EMI regulations of the SX Series has been confirmed according to ... Show Detail
- No：1363
- Displayed Date：2023/04/25 19:00
- Category： Others
When the FALDIC-α series is replaced with the ALPHA5 series or later, is there a difference in 'fail-soft operation' of each servo amplifier connec...

Yes, there is a difference in system operation when control power supply for a servo amplifier is shut down. The ALPHA5 series or later supports the MICREX-... Show Detail
- No：1503
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 13:39
- Category： Function