If battery-less operation is enabled under the 'CPU running definition' setting, the content of the retain memory is not

Fuji Electric website provides information on the standards that the MICREX-SX series complies with. Visit the following

You can check the address range of the CPU by using the loader or in the user's manual. In the Standard loader, after c

1) By the mechanism of program conversion, unused FBs are also registered. However, FBs not used in the program ar

The calendar data is not assigned in the memory. You need to use a program to read/write it. Use the following FBs amon

The supported Windows OSes depend on the loader version. ? Windows 7: V3.5.3.18 or later ? Windows 8: V3.6.5.19 or l

Check the following system memory. If %MX10.4.5 (SM45) 'I/O module error' is turned on, removal of a module may be the

Yes, it is. The bit arrangement (weighting) is opposite between the SX Series and F Series. - SX Series_ LSB_ Bit 0

Set the number of timers according to the number actually used. By simply specifying 8192 or a larger value as the time

Use the 'SX control utility' software. This software is included in both D300win and Standard software. The utility in

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC > Common to SX

Latest FAQ

I creat user FB in StandardV3, and defined input/output parameter as word (WV). Can I directly access any bit within this parameter WV?
We share the D300win and other PLC engineering tool software among several people. Do we need to purchase the software for each person?
I use structure variables with the D300win. How each elements in structure assigned in memory?
I use the CPU module of Type NP1PS-32R/74R/117R/245R. When I create a new project, the displayed option is 'PS32/PS74/PS117/PS245' only. Which shou...
When I defined array (example WL990[WL0]) as start addoress of FMOVE in StandardV2 loader, error was detected by error check. Why?

GLOBAL

Search by category

Keyword Search

FAQ within [ Common to SX ]

81-90 of Total 127

≪ 9 / 13page ≫

The variables I specified as retained by using D300win are not retained through a power failure. What can I do to solve the problem?

If battery-less operation is enabled under the 'CPU running definition' setting, the content of the retain memory is not retained. Disable battery-less opera... Show Detail
- No：1350
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 15:36
- Category： Support tool (D300win)
What standards does the MICREX-SX series comply with?

Fuji Electric website provides information on the standards that the MICREX-SX series complies with. Visit the following URL. Show Detail
- No：1358
- Displayed Date：2023/04/25 19:00
- Category： Others
I am creating a program using SX-Programmer Standard. How can I check the address range of the memory devices that can be used in a program?

You can check the address range of the CPU by using the loader or in the user's manual. In the Standard loader, after creating a project, you can check the ... Show Detail
- No：1480
- Displayed Date：2023/04/25 19:00
- Category： Support tool (Standard)
1) When converting a program on Standard, about 100 FBs are registered in 'Function Blocks.' Are they all FBs being used? 2) Can I find out where a...

1) By the mechanism of program conversion, unused FBs are also registered. However, FBs not used in the program are not downloaded to the CPU, therefor... Show Detail
- No：1508
- Displayed Date：2023/04/25 19:00
- Category： Support tool (Standard)
How can I use the current date and time in the CPU module in application programs?

The calendar data is not assigned in the memory. You need to use a program to read/write it. Use the following FBs among the open FBs released on our websit... Show Detail
- No：1596
- Displayed Date：2023/04/25 19:00
- Category： Application
What Windows OS does the Expert (D300win) support?

The supported Windows OSes depend on the loader version. ? Windows 7: V3.5.3.18 or later ? Windows 8: V3.6.5.19 or later ? Windows 8.1 and 10: V3.6.... Show Detail
- No：1492
- Displayed Date：2023/04/25 19:00
- Category： Support tool (D300win)
I use the hot plug base board with station No. Setup Function (Type_NP1BS-13D). When a module is removed, a nonfatal fault occurs. Please tell me h...

Check the following system memory. If %MX10.4.5 (SM45) 'I/O module error' is turned on, removal of a module may be the cause of the nonfatal fault. [Relat... Show Detail
- No：1542
- Displayed Date：2023/04/25 19:00
- Category： Main unit
I heard that the bit arrangement is opposite between the MICREX-SX Series and MICREX-F Series. Is this true?

Yes, it is. The bit arrangement (weighting) is opposite between the SX Series and F Series. - SX Series_ LSB_ Bit 0 MSB_ Bit 15 (D300win) Bi... Show Detail
- No：1618
- Displayed Date：2023/04/25 19:00
- Category： Application
A global timer with the Standard Loader, T8192 or a larger value must be specified as the timer address. Do I need to set the number of timers as 8...

Set the number of timers according to the number actually used. By simply specifying 8192 or a larger value as the timer number, a global timer can be used. Show Detail
- No：1635
- Displayed Date：2023/04/25 19:00
- Category： Support tool (Standard)
Is there any way to back up the internal data of the CPU by using the loader?

Use the 'SX control utility' software. This software is included in both D300win and Standard software. The utility included in either of them has the ... Show Detail
- No：1294
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 14:18
- Category： Support tool