Yes, both P-link and PE-link cables have limits on the wiring length. [P-link] ・Electrical transmission line Tot

Use the following communication cables from Furukawa Electric Co., Ltd. ・KPEV-SB 0.75mm2 x 1 pair (Max. length: 700m)

No, they do not need to be consecutive. If there are a lot of unused addresses, it may be better to assign addresses

Possible causes are as follows: 1) The baud rate differs between the PLC and the target device. 2) The stop bit diff

Yes, you can use FNC130A-C10 in combination with FNC120A-C10. Attach the same type of optical adapters at the both ends

No, Fuji Electric general-purpose PLCs including the MICREX-SX series do not obtain it.

POU control data is different between the two data transfer methods: 1) by using the MOVE instruction and 2) by conne

There is a difference between 'Unpassive' and 'Fullpasisve' as follows. 1) Unpassive: Communicates with a device that h

This error occurs if data is received and the receive buffer is attempted to be overwritten while data in the receive b

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC > Common to all series

Latest FAQ

In the Ethernet module communication setting, when I select 'Unpassive' communication port opens. However, if 'Fullpassive,' unable to open communi...
A communication error (overrun error or receive buffer overflow) occurred on communication module (NP1L-RS1/RS2/RS3/RS4/RS5). What are the possible...
In D300win, there are two methods to transfer data, by using the MOVE instruction and by connecting variables with a line. Is there any difference ...
Do Fuji Electric PLCs obtain JIS C 0508 (IEC 61508) 'Functional safety of electrical/electronic/programmable electronic safety-related systems'?
Instead of FNC120A-C10, can I use FNC130A-C10?

GLOBAL

Search by category

Keyword Search

FAQ within [ Common to all series ]

1-9 of Total 9

≪ 1 / 1page ≫

Is there a limit on the wiring length of P-link/PE-link cables?

Yes, both P-link and PE-link cables have limits on the wiring length. [P-link] ・Electrical transmission line 　Total length of electrical transmission ... Show Detail
- No：1281
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 13:09
- Category： Communication (Others)
What cable should I use for T-link?

Use the following communication cables from Furukawa Electric Co., Ltd. ・KPEV-SB 0.75mm2 x 1 pair (Max. length: 700m) ・T-KPEV-SB 1.25mm2 x 1 pair (Max. le... Show Detail
- No：1278
- Displayed Date：2023/04/25 19:00
- Category： Communication (T-link)
Do addresses of T-link devices (slave stations) connected to T-link need to be consecutive?

No, they do not need to be consecutive. If there are a lot of unused addresses, it may be better to assign addresses at some intervals for the future expa... Show Detail
- No：1276
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 14:14
- Category： Communication (T-link)
A communication error occurred, saying it was caused by a framing error. What causes a framing error?

Possible causes are as follows: 1) The baud rate differs between the PLC and the target device. 2) The stop bit differs between the PLC and the target devi... Show Detail
- No：1275
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 14:13
- Category： Communication (Others)
Instead of FNC120A-C10, can I use FNC130A-C10?

Yes, you can use FNC130A-C10 in combination with FNC120A-C10. Attach the same type of optical adapters at the both ends of the optical fiber. FNC130A has t... Show Detail
- No：1282
- Displayed Date：2023/04/25 19:00
- Category： Communication (T-link)
Do Fuji Electric PLCs obtain JIS C 0508 (IEC 61508) 'Functional safety of electrical/electronic/programmable electronic safety-related systems'?

No, Fuji Electric general-purpose PLCs including the MICREX-SX series do not obtain it. Show Detail
- No：1283
- Displayed Date：2023/04/25 19:00
- Category： Others
In D300win, there are two methods to transfer data, by using the MOVE instruction and by connecting variables with a line. Is there any difference ...

POU control data is different between the two data transfer methods: 1) by using the MOVE instruction and 2) by connecting variables with a line. Therefor... Show Detail
- No：1473
- Displayed Date：2023/04/25 19:00
- Category： Support tool (D300win)
In the Ethernet module communication setting, when I select 'Unpassive' communication port opens. However, if 'Fullpassive,' unable to open communi...

There is a difference between 'Unpassive' and 'Fullpasisve' as follows. 1) Unpassive: Communicates with a device that has any IP or port No. 2) Fullpassi... Show Detail
- No：1630
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 14:01
- Category： Communication (Ethernet)
A communication error (overrun error or receive buffer overflow) occurred on communication module (NP1L-RS1/RS2/RS3/RS4/RS5). What are the possible...

This error occurs if data is received and the receive buffer is attempted to be overwritten while data in the receive buffer is being read to the memory in ... Show Detail
- No：1629
- Displayed Date：2023/04/25 19:00
- Category： Communication (Others)