The LG terminal is a line filter ground terminal in the power supply module. It is intended for guiding any external noi

The following devices are necessary to connect a personal computer loader and a MICREX-F series PLC: a loader adapter F

The following loader software, connection cable (loader cable), and converter are required. 1) Loader software ・NP4H-S

This error occurs when the system configuration set by the loader software differs from the actual configuration. For e

Check that the terminating plug is attached. Check also that the SX bus expansion cable is not broken. You need to att

[Load] is enabled when the personal computer loader is connected online. * For online connection, see 'Section 3 Onl

Once a compilation error occurs during patch POU, the project must be compiled and downloaded again. Therefore, you need

MICREX-SX series SPF is the replacement for SPB (or SPE).

Modules that use the processor bus, such as the P/PE link and FL-net modules, need be mounted on the slot equipped with

Both Standard and Expert (D300win) are program loader software for the SX series. However, there is no compatibility be

Regional Websites

Product FAQ