The following devices are necessary to connect a personal computer loader and a MICREX-F series PLC:
a loader adapter FLT-ASFKA (or FLT-ASFK), and a USB cable (A-B type, commercially available) or a commercially available RS-232C cable (reverse) compatible with the RS-232C communication port connector of your personal computer.

 

*  For the connection method, see the user's manual shown in 'Related Documents' below. When connecting a personal

   computer loader and a MICREX-F series PLC using a USB cable, download the USB driver.
*  You can download the USB driver by clicking 'FLT-ASFKA USB driver' shown in 'Related Documents' below.

 

When connecting a personal computer loader and a MICREX-F series PLC using the RS-232C communication port, the

connector on the loader adaptor side must be as follows.
FLT-ASFKA: D-sub, 9-pin (male) FLT-ASFK: D-sub, 25-pin (female)

FLT-ASFK is for RS-232C connection only.
For F30, F50, and F50H, a T-link adaptor FTM050A (Ver 0.7 or later) is also necessary in addition to the above devices.
For the personal computer loader, use MICREX-F PLC Programmer included in the product CD of SX-Programmer

Standard (NP4H-SWN).