Check the following points:

<Causes>

1. Multi-overlap (icon) is not place on the screen.
2. Multi-overlap setting (icon) is not correct.
3. Macro commands are not correct.

• To show multi-overlap using a switch, please click here .
• To show multi-overlap using PLC command, please click here .

<Measures>

1. Go to [Home] or [Parts] > [Multi-overlap] and place a multi-overlap icon.
   This icon still works when you place it outside editing area of the screen.
   
    
2. Double-click the multi-overlap icon and sselect [Multi] from [Overlap Setting] and select [Switch] from [Display Method] pulldown box.
    
   
    
3. Double-click the multi-overlap icon and check "Overlap ID" in [Operation Select] dialog box.
    
   
   Check if the overlap ID is the same as the ID set in the multi-overlap icon. Also make sure that the overlap library number is the one you wish to show, as well as macro command.
   
   E.g.) Show overlap library No. 3