<TELLUS-HMI> Connection with YOKOGAWA FA-M3 via Ethernet is not established.
Check the settings below. Screen program settings For V-SFT-6: [System Setting] > [Hardware Setting] For V-SFT-5: [System Setting] > [Device Conne... Show Detail
<V-Server> Is the number of the logging to register limited on V-Server?
It depends on the version of V-Server. Version Number of the logging to register Ver.2.0.0.3 or later No limitation Ver.1.0.0.0 - Ver.2.0.0.2 Up... Show Detail
<V-Server> Is the arithmetic function included as a condition for an event?
No. The conditions of an event are: • Time designation • Value in the memory address (1 word) • Bit ON/OFF Perform arithmetic on the V series. Show Detail
<TELLUS> Displayed characters are garbled or do not fit in the designated spaces.
Check and change the settings below. When Windows fonts are not used: Go to [Option] > [Font] setting to set the fonts to be used. Bring TELLUS to a ... Show Detail
<TELLUS-HMI> Connection with MITSUBISHI Q series via Ethernet unit cannot be established.
Check the setting below. Screen program settings For V-SFT-6: [System Setting] > [Hardware Setting] For V-SFT-5: [System Setting] > [Device Connection... Show Detail
<V-Server> How many monitored devices can be registered?
A maximum of 65,535 monitored devices can be registered. An appropriate number of monitored devices to be registered: Up to twenty devices* when the po... Show Detail
<V-Server> Can I transfer recipe data created on Excel to the PLC?
Yes. Functions: Memory writing* Recipe writing Recipe data Excel file (.xls) CSV file (.csv) Database How to execute: Execute data tra... Show Detail
<V-Server> The monitored device comes to a STOP state on V-Server.
Check the following: Status of monitored device If the monitorred device (V series or HMI-mode TELLUS) is in a STOP state, V-Server will also be brought ... Show Detail
I cannot do the following in the TELLUS-Remote mode: WAV file replay JPEG file display
[Cause] WAV or JPEG files are notstored in the correct folders. For WAV replay, settings in a screen program is not correct. [Solution] Store target is det... Show Detail
Check the output device and set it correctly. For system device ($s/$T): It is not possible to write any value from remote screen to the monitored device. ... Show Detail
21-30 of Total 43