<Causes> [Start Bit] for sampling control device memory is checked, but the bit is not ON. The reset bit for sampl

This error is displayed on the TS/V series. Nothing can be displayed because font data for screen display is not found.

This error may be displayed on the configuration software V-SFT when data is transferred. Possible causes and solutions

This error is displayed when the SRAM area is not formatted on the V8/TS series unit. <Causes> The following con

<Causes> Interlock is set for the switch. ON delay is set for the switch. (TS/V8 only) Touch switch position is de

Two methods are available. Follow the steps below. [To output by setting] Select [System Setting] → [Buffering Area Sett

This error is displayed when Gothic fonts used in the screen data are not installed. <Solutions> Update the V-SF

The action to take varies depending on the symptom. [No text is displayed or a part of text is not displayed] <Caus

<Causes> The file system of the storage device is not supported. The CF card cover is open (V8 series only). The e

To speed up communications, try the following method. [When creating screens] When creating screens, consider the foll

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > HMI > V8/TS2060 series

Latest FAQ

GLOBAL

Search by category

Keyword Search

FAQ within [ V8/TS2060 series ]

71-80 of Total 106

≪ 8 / 11page ≫

Messages are not displayed in the alarm tracking display.

<Causes> [Start Bit] for sampling control device memory is checked, but the bit is not ON. The reset bit for sampling control device memory is ON. T... Show Detail
- No：4745
- Displayed Date：2025/12/01 13:51
- Category： Operation Troubles
"FONT DATA NOT SETTING"

This error is displayed on the TS/V series. Nothing can be displayed because font data for screen display is not found. Font data transfer was canceled dur... Show Detail
- No：4712
- Displayed Date：2025/12/01 13:50
- Category： Error
"The port cannot be opened."

This error may be displayed on the configuration software V-SFT when data is transferred. Possible causes and solutions are given below. [When the transf... Show Detail
- No：4718
- Displayed Date：2025/12/01 13:50
- Category： Error
"Error:161 (24:x)"

This error is displayed when the SRAM area is not formatted on the V8/TS series unit. <Causes> The following conditions cause this error. A. Wh... Show Detail
- No：4726
- Displayed Date：2025/12/01 13:50
- Updated DTM：2025/12/08 16:17
- Category： Error
Pressing a switch does not activate anything.

<Causes> Interlock is set for the switch. ON delay is set for the switch. (TS/V8 only) Touch switch position is deviated. When the screen change sw... Show Detail
- No：4733
- Displayed Date：2025/12/01 13:51
- Category： Operation Troubles
How to save sampling data to a CSV file

Two methods are available. Follow the steps below. [To output by setting] Select [System Setting] → [Buffering Area Setting] on the V-SFT editor and check ... Show Detail
- No：4773
- Displayed Date：2025/12/01 13:51
- Category： Questions about
"The font file cannot be found."

This error is displayed when Gothic fonts used in the screen data are not installed. <Solutions> Update the V-SFT editor to version 5 from our webs... Show Detail
- No：4720
- Displayed Date：2025/12/01 13:49
- Category： Error
Characters are not displayed in character display parts as intended.

The action to take varies depending on the symptom. [No text is displayed or a part of text is not displayed] <Causes> Windows fonts are used but ... Show Detail
- No：4737
- Displayed Date：2025/12/01 13:51
- Category： Operation Troubles
MONITOUCH does not recognize the storage dvice.

<Causes> The file system of the storage device is not supported. The CF card cover is open (V8 series only). The error status is set in $s497 (or $s... Show Detail
- No：4750
- Displayed Date：2025/12/01 13:51
- Category： Operation Troubles
Communication between the PLC and the V/TS series is slow.

To speed up communications, try the following method. [When creating screens] When creating screens, consider the following points to improve the communi... Show Detail
- No：4878
- Displayed Date：2025/12/01 13:49
- Updated DTM：2025/12/08 16:05
- Category： Operation Troubles