Depending on the MONITOUCH model and hardware version*, the backlight may or may not be replaced by the customer. * The

Follow the steps below. * If you are using the V-SFT-6, see here. [V8/TS series] Display the [Switch] dialog, select

The correction method differs depending on the calendar reading target (PLC or V/TS). For the reading target, check the

The solutions vary depending on the screen data settings. Check the following settings. Setting location: V-SFT editor [

<Causes> The file system of the storage device is not supported. The CF card cover is open (V8 series only). The e

<Cause> [Buffering Area Setting] → [Number of Data to Save] is small. <Solution> Increase the number set

This error is displayed on the V/TS series when an error is detected in the transferred screen data. <Solutions>

The temperature controller condition is output to the system device memory of the V/TS. Check the following addresses fo

To speed up communications, try the following method. [When creating screens] When creating screens, consider the foll

Yes, mounting fixtures are available for purchase. Refer to the following table for the type and applicable model [Mou

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > HMI > V8/TS2060 series

Latest FAQ

GLOBAL

Search by category

Keyword Search

FAQ within [ V8/TS2060 series ]

11-20 of Total 106

≪ 2 / 11page ≫

Is the backlight replaceable?

Depending on the MONITOUCH model and hardware version*, the backlight may or may not be replaced by the customer. * The hardware version is indicated on the... Show Detail
- No：4798
- Displayed Date：2025/12/01 13:52
- Category： Product Specifications
How to make a switch work only when the switch is held down

Follow the steps below. * If you are using the V-SFT-6, see here. [V8/TS series] Display the [Switch] dialog, select [Delay] and set for [ON delay] (uni... Show Detail
- No：4793
- Displayed Date：2025/12/01 13:50
- Updated DTM：2025/12/11 14:46
- Category： Questions about
How to set (correct) the calendar

The correction method differs depending on the calendar reading target (PLC or V/TS). For the reading target, check the following setting. Setting locati... Show Detail
- No：4779
- Displayed Date：2025/12/01 13:51
- Updated DTM：2025/12/08 12:25
- Category： Questions about
The time and date is not displayed correctly.

The solutions vary depending on the screen data settings. Check the following settings. Setting location: V-SFT editor [System Setting]→[Unit Setting]→[SR... Show Detail
- No：4751
- Displayed Date：2025/12/01 13:51
- Updated DTM：2025/12/08 12:17
- Category： Operation Troubles
MONITOUCH does not recognize the storage dvice.

<Causes> The file system of the storage device is not supported. The CF card cover is open (V8 series only). The error status is set in $s497 (or $s... Show Detail
- No：4750
- Displayed Date：2025/12/01 13:51
- Category： Operation Troubles
In the alarm tracking display, alarm data is not tracked for the specified number of times.

<Cause> [Buffering Area Setting] → [Number of Data to Save] is small. <Solution> Increase the number set for [Number of Data to Save]. For ... Show Detail
- No：4748
- Displayed Date：2025/12/01 13:51
- Category： Operation Troubles
"Error : XX (XX : XXX)"

This error is displayed on the V/TS series when an error is detected in the transferred screen data. <Solutions> Read the error code as shown below... Show Detail
- No：4709
- Displayed Date：2025/12/01 13:50
- Category： Error
How to check the communication condition between the temperature controller and the V/TS

The temperature controller condition is output to the system device memory of the V/TS. Check the following addresses for each station number. [V8/TS] Sel... Show Detail
- No：4883
- Displayed Date：2025/12/01 13:50
- Updated DTM：2025/12/08 11:59
- Category： Questions about
Communication between the PLC and the V/TS series is slow.

To speed up communications, try the following method. [When creating screens] When creating screens, consider the following points to improve the communi... Show Detail
- No：4878
- Displayed Date：2025/12/01 13:49
- Updated DTM：2025/12/08 16:05
- Category： Operation Troubles
Can I purchase mounting fixtures?

Yes, mounting fixtures are available for purchase. Refer to the following table for the type and applicable model [Mounting fixture type/applicable model... Show Detail
- No：4804
- Displayed Date：2025/12/01 13:50
- Category： Product Specifications