This error is displayed when the SRAM area is not formatted on the V10/V9 series unit. <Causes> The following c

Number of the characters in a variable comment exceeds 255 in the D300Win(Ver.3) programming software. Delete the commen

<Causes> When the PLC model setting is changed, it is replaced with device "??". PLC2 - 8 are set as "not used" (d

<Causes> The screen data you attempted to open includes a function not supported by the V-SFT version in use. &l

Automatic uploading of screen data etc. from a storage device (SD card or USB flash drive) when the V series is turned o

Latest FAQ

GLOBAL

21-25 of Total 25

≪ 3 / 3page ≫

Screen Data Error "Error: 161 (SRAM:x)"

This error is displayed when the SRAM area is not formatted on the V10/V9 series unit. <Causes> The following conditions cause this error. A.When ... Show Detail
- No：4568
- Displayed Date：2025/12/01 13:46
"Line length over"

Number of the characters in a variable comment exceeds 255 in the D300Win(Ver.3) programming software. Delete the comment. D300Win(Ver.3) is designed to hav... Show Detail
- No：4562
- Displayed Date：2025/12/01 13:46
The PLC device memory address for a part is garbled as "??" or is "blank".

<Causes> When the PLC model setting is changed, it is replaced with device "??". PLC2 - 8 are set as "not used" (delete). Variable name cooperation ... Show Detail
- No：4559
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/11 12:37
"It is not possible to open this file because there is a function that is not able to use."

<Causes> The screen data you attempted to open includes a function not supported by the V-SFT version in use. <Solutions> Update the V-SFT v... Show Detail
- No：4557
- Displayed Date：2025/12/01 13:47
"Insert Storage in V9" "Insert Storage in V10"

Automatic uploading of screen data etc. from a storage device (SD card or USB flash drive) when the V series is turned on is enabled by default. This error i... Show Detail
- No：4552
- Displayed Date：2025/12/01 13:47