An invalid device memory is set in the screen program. Cause 1: X/Y device memory, P/PE link, or FL-Net device memory is

Check the [Waiting time for structure check] and [Fail-soft operation setting] settings on the SX side. If the [Waiting

This page describes the following errors. Screen programs for SX Programmer Expert (D300Win) projects Not exist a work s

Automatic uploading of screen data etc. from a storage device (SD card or USB flash drive) when the V series is turned o

This error is displayed when there is no screen data or system program transferred to the V series. <Solution> R

This error may be displayed on the configuration software when data is transferred. When the V series does not respond w

This error is displayed in Local mode when a battery problem has occurred to the V series. (The battery is set in the V

An unavailable device memory address is set or the available device memory range is exceeded. Causes The causes are li

This error may be displayed on the configuration software V-SFT when data is transferred via Ethernet. Possible causes a

When Fuji Electric MICREX-SX is selected, this error is displayed if screen data uses input/output memory (X, Y), or P l

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > HMI > V10/V9 series > Error

Latest FAQ

GLOBAL

Search by category

Keyword Search

FAQ within [ Error ]

11-20 of Total 25

≪ 2 / 3page ≫

The error "It is beyond the limits of the data." occurs in the V-SFT error check during editing of a screen that connects to MICREX-SX.

An invalid device memory is set in the screen program. Cause 1: X/Y device memory, P/PE link, or FL-Net device memory is specified but the SX device memory... Show Detail
- No：4567
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:36
When the MICREX-SX PLC is connected via the SX bus, the V10/V9 series unit encounters a communication error ("Time-Out") at startup.

Check the [Waiting time for structure check] and [Fail-soft operation setting] settings on the SX side. If the [Waiting time for structure check] setting is... Show Detail
- No：4564
- Displayed Date：2025/12/01 13:46
An error occurs in V-SFT when opening a screen program that connects to MICREX-SX

This page describes the following errors. Screen programs for SX Programmer Expert (D300Win) projects Not exist a work sheet/group. It is DDE communicatio... Show Detail
- No：4873
- Displayed Date：2025/12/01 13:46
"Insert Storage in V9" "Insert Storage in V10"

Automatic uploading of screen data etc. from a storage device (SD card or USB flash drive) when the V series is turned on is enabled by default. This error i... Show Detail
- No：4552
- Displayed Date：2025/12/01 13:47
Setup Error

This error is displayed when there is no screen data or system program transferred to the V series. <Solution> Resolve the error according to the e... Show Detail
- No：4551
- Displayed Date：2025/12/01 13:47
"Receive timeout"

This error may be displayed on the configuration software when data is transferred. When the V series does not respond within the set time, this error occurs... Show Detail
- No：4554
- Displayed Date：2025/12/01 13:47
"Battery changeover required"

This error is displayed in Local mode when a battery problem has occurred to the V series. (The battery is set in the V series at shipment.) <Cause>... Show Detail
- No：4553
- Displayed Date：2025/12/01 13:46
Screen Data Error "Error:46"

An unavailable device memory address is set or the available device memory range is exceeded. Causes The causes are listed below. Device memory set in t... Show Detail
- No：4570
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:51
"Editor is occupied by another port"

This error may be displayed on the configuration software V-SFT when data is transferred via Ethernet. Possible causes and solutions are given below. &... Show Detail
- No：4560
- Displayed Date：2025/12/01 13:47
"Import file is not selected"

When Fuji Electric MICREX-SX is selected, this error is displayed if screen data uses input/output memory (X, Y), or P link/PE link/FL-net (CPU No. 8, 9) mem... Show Detail
- No：4558
- Displayed Date：2025/12/01 13:47