This page describes the following errors. Screen programs for SX Programmer Expert (D300Win) projects Not exist a work s

This error is displayed on the V series when simulator communication is not established correctly between the V series a

This error is displayed when there is no screen data or system program transferred to the V series. <Solution> R

This error is displayed in Local mode when a battery problem has occurred to the V series. (The battery is set in the V

<Causes> When the PLC model setting is changed, it is replaced with device "??". PLC2 - 8 are set as "not used" (d

Number of the characters in a variable comment exceeds 255 in the D300Win(Ver.3) programming software. Delete the commen

This error is displayed when the V series does not receive an answer from a connected device (PLC, temperature controlle

This error is displayed on the V series when an error is detected in the transferred screen data. <Solutions> Re

An unavailable device memory address is set or the available device memory range is exceeded. Causes The causes are li

An invalid device memory is set in the screen program. Cause 1: X/Y device memory, P/PE link, or FL-Net device memory is

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > HMI > V10/V9 series > Error

Latest FAQ

GLOBAL

Search by category

Keyword Search

FAQ within [ Error ]

11-20 of Total 25

≪ 2 / 3page ≫

An error occurs in V-SFT when opening a screen program that connects to MICREX-SX

This page describes the following errors. Screen programs for SX Programmer Expert (D300Win) projects Not exist a work sheet/group. It is DDE communicatio... Show Detail
- No：4873
- Displayed Date：2025/12/01 13:46
Communication Error "Simulator: Timeout", "Simulator: Link down"

This error is displayed on the V series when simulator communication is not established correctly between the V series and the PC. [Communication with a P... Show Detail
- No：4549
- Displayed Date：2025/12/01 13:47
Setup Error

This error is displayed when there is no screen data or system program transferred to the V series. <Solution> Resolve the error according to the e... Show Detail
- No：4551
- Displayed Date：2025/12/01 13:47
"Battery changeover required"

This error is displayed in Local mode when a battery problem has occurred to the V series. (The battery is set in the V series at shipment.) <Cause>... Show Detail
- No：4553
- Displayed Date：2025/12/01 13:46
The PLC device memory address for a part is garbled as "??" or is "blank".

<Causes> When the PLC model setting is changed, it is replaced with device "??". PLC2 - 8 are set as "not used" (delete). Variable name cooperation ... Show Detail
- No：4559
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/11 12:37
"Line length over"

Number of the characters in a variable comment exceeds 255 in the D300Win(Ver.3) programming software. Delete the comment. D300Win(Ver.3) is designed to hav... Show Detail
- No：4562
- Displayed Date：2025/12/01 13:46
Communication Error "Timeout"

This error is displayed when the V series does not receive an answer from a connected device (PLC, temperature controller, etc.) within the predetermined tim... Show Detail
- No：4547
- Displayed Date：2025/12/01 13:47
Screen Program Error "Error : XX (XX : XXX)"

This error is displayed on the V series when an error is detected in the transferred screen data. <Solutions> Read the error code as shown below. F... Show Detail
- No：4550
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:25
Screen Data Error "Error:46"

An unavailable device memory address is set or the available device memory range is exceeded. Causes The causes are listed below. Device memory set in t... Show Detail
- No：4570
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:51
The error "It is beyond the limits of the data." occurs in the V-SFT error check during editing of a screen that connects to MICREX-SX.

An invalid device memory is set in the screen program. Cause 1: X/Y device memory, P/PE link, or FL-Net device memory is specified but the SX device memory... Show Detail
- No：4567
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:36