The following software packages were verified. To install those software packages, please refer to the instruction ma

Use the simulator. The simulator allows you to verify screen operations without a PLC. The simulator runs on a PC and si

An invalid device memory is set in the screen program. Cause 1: X/Y device memory, P/PE link, or FL-Net device memory is

Alarm server setting has scrolling message feature. By selecting "Flowing message" as an action to take when alarm occ

The correction method differs depending on the calendar reading target (PLC or V10/V9 series). For the reading target, c

Check the settings below: V10/V9's calendar settings If date and time set on the V10/V9 unit is not correct, it is not

This error may be displayed on the configuration software when data is transferred. When the V series does not respond w

There are four overlap part types. Normal overlap Call-overlap Multi overlap Global overlap In the case of external co

This is an address error. An invalid device memory is set in the screen program. The causes are listed below. Cause 1:

Follow the procedure below. * For V8-compatible screen programs, use [Read Area]. Click [System Setting] → [Unit Setti

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > HMI > V10/V9 series

Latest FAQ

GLOBAL

Search by category

Keyword Search

FAQ within [ V10/V9 series ]

21-30 of Total 166

≪ 3 / 17page ≫

I want to install a viewer software on a VNC client.

The following software packages were verified. To install those software packages, please refer to the instruction manual from each vendor. Software O... Show Detail
- No：4645
- Displayed Date：2025/12/01 13:48
- Updated DTM：2025/12/08 11:27
- Category： Questions about
How to check the operation of screens without connecting to a PLC

Use the simulator. The simulator allows you to verify screen operations without a PLC. The simulator runs on a PC and simulates bit device ON/OFF action an... Show Detail
- No：4643
- Displayed Date：2025/12/01 13:48
- Category： Questions about
The error "It is beyond the limits of the data." occurs in the V-SFT error check during editing of a screen that connects to MICREX-SX.

An invalid device memory is set in the screen program. Cause 1: X/Y device memory, P/PE link, or FL-Net device memory is specified but the SX device memory... Show Detail
- No：4567
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:36
- Category： Error
I want to have scrolling alarm messages on my screen.

Alarm server setting has scrolling message feature. Byselecting "Flowing message" as an action to take when alarm occurs, alarm message areaappears on the... Show Detail
- No：4653
- Displayed Date：2025/12/01 13:48
- Category： Questions about
How to set (correct) the calendar

The correction method differs depending on the calendar reading target (PLC or V10/V9 series). For the reading target, check the following setting. Setting... Show Detail
- No：4637
- Displayed Date：2025/12/01 13:48
- Category： Questions about
I cannot set the IP address to setup VPN connection.

Check the settings below: V10/V9's calendar settings If date and time set on the V10/V9 unit is not correct, it is not possible to establish VPN connecti... Show Detail
- No：4563
- Displayed Date：2025/12/01 13:46
- Category： Error
"Receive timeout"

This error may be displayed on the configuration software when data is transferred. When the V series does not respond within the set time, this error occurs... Show Detail
- No：4554
- Displayed Date：2025/12/01 13:47
- Category： Error
How to display overlap parts from the PLC (external)

There are four overlap part types. Normal overlap Call-overlap Multi overlap Global overlap In the case of external commands, the display method diffe... Show Detail
- No：4618
- Displayed Date：2025/12/01 13:48
- Category： Questions about
I want to connect to MICREX-SX but "Communication Error: Error Code received " occurs.

This is an address error. An invalid device memory is set in the screen program. The causes are listed below. Cause 1: X/Y device memory, P/PE link, or ... Show Detail
- No：4566
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:33
- Category： Error
How to sound a buzzer according to a command from the PLC (external)

Follow the procedure below. * For V8-compatible screen programs, use [Read Area]. Click [System Setting]→[Unit Setting]→[Buzzer] on the V-SFT editor. ... Show Detail
- No：4597
- Displayed Date：2025/12/01 13:49
- Updated DTM：2025/12/11 12:56
- Category： Questions about