There are four overlap part types. Normal overlap Call-overlap Multi overlap Global overlap In the case of external co

The V9/V8/V7/V6/V4 series and GD-80 series can be replaced with the current models. Note that, however, the compatibilit

Check the [Waiting time for structure check] and [Fail-soft operation setting] settings on the SX side. If the [Waiting

This error is displayed on the V series when simulator communication is not established correctly between the V series a

The solutions vary depending on the screen data settings. Check the following settings. Setting location: V-SFT editor

There are two methods. Follow the steps below. [Method 1: Copy each item] Click [File] → [Comparing]. Enter filena

You can change it to zero-suppress display from [Display Environment] menu. Follow the step below. Go to [View] > [

An unavailable device memory address is set or the available device memory range is exceeded. Causes The causes are li

This error may be displayed on the configuration software when data is transferred. When the V series does not respond w

There are two methods: - checking it from overlap library edit screen - using Emulator to show the overlap * If the

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > HMI > V10/V9 series

Latest FAQ

GLOBAL

Search by category

Keyword Search

FAQ within [ V10/V9 series ]

11-20 of Total 166

≪ 2 / 17page ≫

How to display overlap parts from the PLC (external)

There are four overlap part types. Normal overlap Call-overlap Multi overlap Global overlap In the case of external commands, the display method diffe... Show Detail
- No：4618
- Displayed Date：2025/12/01 13:48
- Category： Questions about
How to replace a discontinued the MONITOUCH unit

The V9/V8/V7/V6/V4 series and GD-80 series can be replaced with the current models. Note that, however, the compatibility is not 100% and some restrictions ... Show Detail
- No：4874
- Displayed Date：2025/12/01 13:48
- Category： Questions about
When the MICREX-SX PLC is connected via the SX bus, the V10/V9 series unit encounters a communication error ("Time-Out") at startup.

Check the [Waiting time for structure check] and [Fail-soft operation setting] settings on the SX side. If the [Waiting time for structure check] setting is... Show Detail
- No：4564
- Displayed Date：2025/12/01 13:46
- Category： Error
Communication Error "Simulator: Timeout", "Simulator: Link down"

This error is displayed on the V series when simulator communication is not established correctly between the V series and the PC. [Communication with a P... Show Detail
- No：4549
- Displayed Date：2025/12/01 13:47
- Category： Error
The time and date is not displayed correctly.

The solutions vary depending on the screen data settings. Check the following settings. Setting location: V-SFT editor [System Setting]→[Unit Setting]→[... Show Detail
- No：4588
- Displayed Date：2025/12/01 13:47
- Updated DTM：2025/12/11 12:53
- Category： Operation Troubles
How to copy a screen from one file to another

There are two methods. Follow the steps below. [Method 1: Copy each item] Click [File]→[Comparing]. Enter filenames for [Comparison] (source) and ... Show Detail
- No：4611
- Displayed Date：2025/12/01 13:48
- Updated DTM：2025/12/08 18:57
- Category： Questions about
Device address display is too long to see each address correctly while editing screens. Can I make the address display shorter?

You can change it to zero-suppress display from [Display Environment] menu. Follow the step below. Go to [View] > [Display Environment]. Check ... Show Detail
- No：4590
- Displayed Date：2025/12/01 13:47
- Updated DTM：2025/12/08 12:33
- Category： Operation Troubles
Screen Data Error "Error:46"

An unavailable device memory address is set or the available device memory range is exceeded. Causes The causes are listed below. Device memory set in t... Show Detail
- No：4570
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:51
- Category： Error
"Receive timeout"

This error may be displayed on the configuration software when data is transferred. When the V series does not respond within the set time, this error occurs... Show Detail
- No：4554
- Displayed Date：2025/12/01 13:47
- Category： Error
Can I check where on the screen the multi-overlap I made is displayed on V-SFT?

There are two methods: - checking it from overlap library edit screen - using Emulator to show the overlap * If the multi-overlap is diplayed using a bu... Show Detail
- No：4666
- Displayed Date：2025/12/01 13:48
- Category： Questions about