There are two methods. Follow the steps below. [Method 1: Copy each item] Click [File] → [Comparing]. Enter filena

The solutions vary depending on the screen data settings. Check the following settings. Setting location: V-SFT editor

This error is displayed on the V series when simulator communication is not established correctly between the V series a

Check the [Waiting time for structure check] and [Fail-soft operation setting] settings on the SX side. If the [Waiting

The V9/V8/V7/V6/V4 series and GD-80 series can be replaced with the current models. Note that, however, the compatibilit

There are four overlap part types. Normal overlap Call-overlap Multi overlap Global overlap In the case of external co

Click on the numerical data display part (Function: Entry Target). Display the [Num. Display] dialog, select [Other Sett

This error may be displayed on the configuration software V-SFT when data is transferred. When the PC port cannot be ope

This error occurs when a TCP connection cannot be established when connecting to a network device using TCP/IP. <Ca

This error occurs when using a V8 compatible setting (*) on a V10/V9 series unit. At the start of communication, the V10

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > HMI > V10/V9 series

Latest FAQ

GLOBAL

Search by category

Keyword Search

FAQ within [ V10/V9 series ]

151-160 of Total 166

≪ 16 / 17page ≫

How to copy a screen from one file to another

There are two methods. Follow the steps below. [Method 1: Copy each item] Click [File]→[Comparing]. Enter filenames for [Comparison] (source) and ... Show Detail
- No：4611
- Displayed Date：2025/12/01 13:48
- Updated DTM：2025/12/08 18:57
- Category： Questions about
The time and date is not displayed correctly.

The solutions vary depending on the screen data settings. Check the following settings. Setting location: V-SFT editor [System Setting]→[Unit Setting]→[... Show Detail
- No：4588
- Displayed Date：2025/12/01 13:47
- Updated DTM：2025/12/11 12:53
- Category： Operation Troubles
Communication Error "Simulator: Timeout", "Simulator: Link down"

This error is displayed on the V series when simulator communication is not established correctly between the V series and the PC. [Communication with a P... Show Detail
- No：4549
- Displayed Date：2025/12/01 13:47
- Category： Error
When the MICREX-SX PLC is connected via the SX bus, the V10/V9 series unit encounters a communication error ("Time-Out") at startup.

Check the [Waiting time for structure check] and [Fail-soft operation setting] settings on the SX side. If the [Waiting time for structure check] setting is... Show Detail
- No：4564
- Displayed Date：2025/12/01 13:46
- Category： Error
How to replace a discontinued the MONITOUCH unit

The V9/V8/V7/V6/V4 series and GD-80 series can be replaced with the current models. Note that, however, the compatibility is not 100% and some restrictions ... Show Detail
- No：4874
- Displayed Date：2025/12/01 13:48
- Category： Questions about
How to display overlap parts from the PLC (external)

There are four overlap part types. Normal overlap Call-overlap Multi overlap Global overlap In the case of external commands, the display method diffe... Show Detail
- No：4618
- Displayed Date：2025/12/01 13:48
- Category： Questions about
How to limit the values that can be entered through the keypad

Click on the numerical data display part (Function: Entry Target). Display the [Num. Display] dialog, select [Other Settings] -> [Operation/Alarm] and ch... Show Detail
- No：4627
- Displayed Date：2025/12/01 13:48
- Category： Questions about
"The port cannot be opened."

This error may be displayed on the configuration software V-SFT when data is transferred. When the PC port cannot be opened, this error occurs. [When "U... Show Detail
- No：4555
- Displayed Date：2025/12/01 13:47
- Updated DTM：2025/12/15 10:32
- Category： Error
A TCP connection cannot be established.

This error occurs when a TCP connection cannot be established when connecting to a network device using TCP/IP. <Cause> The LAN cable is not connec... Show Detail
- No：4569
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:49
- Category： Error
"Screen No. Error"

This error occurs when using a V8 compatible setting (*) on a V10/V9 series unit. At the start of communication, the V10/V9 series initially displays the sc... Show Detail
- No：4565
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:29
- Category： Error