Check the [Waiting time for structure check] and [Fail-soft operation setting] settings on the SX side. If the [Waiting

There are two methods. Follow the steps below. [Method 1: Copy each item] Click [File] → [Comparing]. Enter filena

The correction method differs depending on the calendar reading target (PLC or V10/V9 series). For the reading target, c

You can achieve these features: ■ Screen program transfer ■ VNC server function ■ FTP server function ■ PLC ladder tran

An invalid device memory is set in the screen program. Cause 1: X/Y device memory, P/PE link, or FL-Net device memory is

There are three methods. [Change the setting on V series] Switch to Local mode, select [System setting] > [Backlight

Set "SRAM" as the saving destination of logging data. With [SRAM] selected, backup power is supplied from the battery at

Check it with system device memory ($s) of the V series. Built-in socket: $s497, USB-A port: $s1035 Output No. Descript

There are two methods of removing storage devices safely. [How to remove storage devices on the system menu] Press [Sy

Yes. Set as shown below. Configure [PLC1] as a temperature controller at [System Setting] -> [Hardware Setting] on th

Font Size
S
M
L

GLOBAL > HMI > V10/V9 series

Latest FAQ

GLOBAL

Search by category

Keyword Search

FAQ within [ V10/V9 series ]

91-100 of Total 166

≪ 10 / 17page ≫

When the MICREX-SX PLC is connected via the SX bus, the V10/V9 series unit encounters a communication error ("Time-Out") at startup.

Check the [Waiting time for structure check] and [Fail-soft operation setting] settings on the SX side. If the [Waiting time for structure check] setting is... Show Detail
- No：4564
- Displayed Date：2025/12/01 13:46
- Category： Error
How to copy a screen from one file to another

There are two methods. Follow the steps below. [Method 1: Copy each item] Click [File]→[Comparing]. Enter filenames for [Comparison] (source) and ... Show Detail
- No：4611
- Displayed Date：2025/12/01 13:48
- Updated DTM：2025/12/08 18:57
- Category： Questions about
How to set (correct) the calendar

The correction method differs depending on the calendar reading target (PLC or V10/V9 series). For the reading target, check the following setting. Setting... Show Detail
- No：4637
- Displayed Date：2025/12/01 13:48
- Category： Questions about
What can I do with VPN function?

You can achieve these features: ■ Screen program transfer ■ VNC server function ■ FTP server function ■ PLC ladder transfer function ■ Network camera - ... Show Detail
- No：4649
- Displayed Date：2025/12/01 13:48
- Category： Questions about
The error "It is beyond the limits of the data." occurs in the V-SFT error check during editing of a screen that connects to MICREX-SX.

An invalid device memory is set in the screen program. Cause 1: X/Y device memory, P/PE link, or FL-Net device memory is specified but the SX device memory... Show Detail
- No：4567
- Displayed Date：2025/12/01 13:46
- Updated DTM：2025/12/08 11:36
- Category： Error
How to change setting for the backlight

There are three methods. [Change the setting on V series] Switch to Local mode, select [System setting] > [Backlight setting] to make changes and press ... Show Detail
- No：4603
- Displayed Date：2025/12/01 13:49
- Category： Questions about
How to save logging data even after turning off power to the V series

Set "SRAM" as the saving destination of logging data. With [SRAM] selected, backup power is supplied from the battery attached to the MONITOUCH when the pow... Show Detail
- No：4630
- Displayed Date：2025/12/01 13:49
- Category： Questions about
How to check whether or not a storage is recognized

Check it with system device memory ($s) of the V series. Built-in socket: $s497, USB-A port: $s1035 Output No. Description Remarks 0 Normal ... Show Detail
- No：4633
- Displayed Date：2025/12/01 13:48
- Category： Questions about
How to remove storage devices safely from the V10/V9 series unit

There are two methods of removing storage devices safely. [How to remove storage devices on the system menu] Press [System Menu] > [Storage Removal]. ... Show Detail
- No：4636
- Displayed Date：2025/12/01 13:48
- Category： Questions about
Can I connect V10/V9 only with a temperature controller without connecting any PLC?

Yes. Set as shown below. Configure [PLC1] as a temperature controller at [System Setting] -> [Hardware Setting] on the V-SFT editor. Show Detail
- No：4642
- Displayed Date：2025/12/01 13:48
- Category： Questions about

91-100 of Total 166

V10/V9 series

Available Devices

Info & News

To Top of Page

V10/V9 series

Regional Websites

About Us

Products & Solutions

Investor Relations

Sustainability

Latest FAQ

GLOBAL

Search by category

Keyword Search

FAQ within [ V10/V9 series ]

V10/V9 series

Info & News