The way to install or update configuration software "V-SFT-5" is as follows. [Either or both V-SFT-5 or V-SFT-6 alread

Depending on the MONITOUCH model and hardware version*, the backlight may or may not be replaced by the customer. * The

Screen program transfer is possible using a commercially-available USB or Ethernet cable. The "V-CP" or "UG00C-T1" seria

This error is displayed on the V/TS series when an error is detected in the transferred screen data. <Solutions>

To launch the configuration software V-SFT version 5, the following system environment is required. PC PC/AT compatibl

Configure settings as follows. Select [System Setting] → [Unit Setting] → [General Settings] on the V-SFT editor and che

<Causes> A wrong language number is specified for the switch [Function: Language changeover]. (V8/TS series only)

<Cause> When displaying a normal overlap or call-overlap part according to the status of the corresponding bit in

This error is displayed on the V series when simulator communication is not established correctly between the V series a

See the following: V8/TS2060 Connectable models * For more information about part numbers and cable connection, refer

Font Size
S
M
L

GLOBAL > HMI

Latest FAQ

<TELLUS-Remote> Are macro commands on the TELLUS remote screens executed?
<TELLUS and V-Server> What is "licencing"?
Though a monitored device is updated from V-Server, the version number the monitored device goes down.
I want to use alarm monitoring function on V-Server, but the option [Alarm Monitor Setting] is inactive.
<TELLUS-Remote> I want to synchronize the TELLUS remote screens and the monitored device.

GLOBAL

Search by category

Keyword Search

FAQ within [ HMI ]

31-40 of Total 315

≪ 4 / 32page ≫

How do I install or update configuration software "V-SFT-5"?

The way to install or update configuration software "V-SFT-5" is as follows. [Either or both V-SFT-5 or V-SFT-6 already installed] Download the update mo... Show Detail
- No：4802
- Displayed Date：2025/12/01 13:50
- Category： Product Specifications
Is the backlight replaceable?

Depending on the MONITOUCH model and hardware version*, the backlight may or may not be replaced by the customer. * The hardware version is indicated on the... Show Detail
- No：4798
- Displayed Date：2025/12/01 13:52
- Category： Product Specifications
What types of cables can be used for screen program transfer?

Screen program transfer is possible using a commercially-available USB or Ethernet cable. The "V-CP" or "UG00C-T1" serial transfer cable manufactured by Hak... Show Detail
- No：4699
- Displayed Date：2025/12/01 13:48
- Category： Product Specifications
"Error : XX (XX : XXX)"

This error is displayed on the V/TS series when an error is detected in the transferred screen data. <Solutions> Read the error code as shown below... Show Detail
- No：4709
- Displayed Date：2025/12/01 13:50
- Category： Error
Operating system requirements and environment for configuration software "V-SFT-5"

To launch the configuration software V-SFT version 5, the following system environment is required. PC PC/AT compatible for Windows OS *1 Windows X... Show Detail
- No：4801
- Displayed Date：2025/12/01 13:52
- Category： Product Specifications
How to sound a continuous buzzer according to a command from the PLC (external)

Configure settings as follows. Select [System Setting] → [Unit Setting] → [General Settings] on the V-SFT editor and check [Use Continuous Buzzer Sound]. ... Show Detail
- No：4756
- Displayed Date：2025/12/01 13:52
- Category： Questions about
A screen in multiple languages is created; however, the displayed language does not change.

<Causes> A wrong language number is specified for the switch [Function: Language changeover]. (V8/TS series only) The screen is not refreshed after t... Show Detail
- No：4752
- Displayed Date：2025/12/01 13:51
- Category： Operation Troubles
When a screen with an overlap display is switched to another and is switched back, the overlap part disappears.

<Cause> When displaying a normal overlap or call-overlap part according to the status of the corresponding bit in read area "n + 1", this is recognize... Show Detail
- No：4732
- Displayed Date：2025/12/01 13:51
- Category： Operation Troubles
Communication Error "Simulator: Timeout", "Simulator: Link down"

This error is displayed on the V series when simulator communication is not established correctly between the V series and the PC. [Communication with a P... Show Detail
- No：4549
- Displayed Date：2025/12/01 13:47
- Category： Error
What PLC models can be connected?

See the following: V8/TS2060 Connectable models * For more information aboutpart numbersand cable connection, refer to the V8 Series Connection Manual o... Show Detail
- No：4806
- Displayed Date：2025/12/01 13:52
- Category： Available Devices

31-40 of Total 315

HMI

TELLUS and V-Server

Info & News

To Top of Page

HMI

Regional Websites

About Us

Products & Solutions

Investor Relations

Sustainability