You can display the mismatch circuit in the program and differences using the 'Verify' command of the Standard loader.

The execution order of the contacts and coils in a ladder circuit partly differs between MICREX-F and MICREX-SX. Theref

The supported Windows OSes depend on the loader version. In the case of Standard V2, ・Windows 7: V2.3.6.0 or later ・

Select the tag you want to delete by placing the cursor on its address, move the mouse at the right-hand end of the same

To make the 'Use USB port' check box selectable, the USB driver for MICREX-SX must be installed on the PC in use. Insta

Version 2 is not based on the concept of online/offline switching. It is designed in such a way that you select online

Yes, you can. On the 'Load from PLC' dialog, check 'Reflect Real Structure,' and then connect the PLC online. If this op

Differentiation contacts and differentiation coils are instructions categorized as system FB. The instance number is a n

The Standard Loader does not support color printing.

Yes_ however, it is not recommended in terms of program reuse. It is better to use internal memory such as M and L by c

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC > Common to SX > Support tool (Standard)

Latest FAQ

I creat user FB in StandardV3, and defined input/output parameter as word (WV). Can I directly access any bit within this parameter WV?
When I defined array (example WL990[WL0]) as start addoress of FMOVE in StandardV2 loader, error was detected by error check. Why?
When comparing the project in CPU with that in the personal computer by Standard loader, a mismatch between the programs was detected. How can I fi...
When I tried to download a project to the CPU with StandardV3, an error message appeared saying 'The size of Zip file exceeds the capacity.' and th...
I converted a MICREX-F program to a MICREX-SX using StandardV3 loader. Contact and coil M8720 (TEMP0) which did not exist before conversion were cr...

GLOBAL

Search by category

Keyword Search

FAQ within [ Support tool (Standard) ]

11-20 of Total 38

≪ 2 / 4page ≫

When comparing the project in CPU with that in the personal computer by Standard loader, a mismatch between the programs was detected. How can I fi...

You can display the mismatch circuit in the program and differences using the 'Verify' command of the Standard loader. After uploading the project from the... Show Detail
- No：1664
- Displayed Date：2023/04/25 19:00
I converted a MICREX-F program to a MICREX-SX using StandardV3 loader. Contact and coil M8720 (TEMP0) which did not exist before conversion were cr...

The execution order of the contacts and coils in a ladder circuit partly differs between MICREX-F and MICREX-SX. Therefore, if a MICREX-F program is convert... Show Detail
- No：1657
- Displayed Date：2023/04/25 19:00
What Windows OS does the Standard loader support?

The supported Windows OSes depend on the loader version. In the case of Standard V2, ・Windows 7: V2.3.6.0 or later ・Windows 8: V2.3.7.0 or later ・Window... Show Detail
- No：1491
- Displayed Date：2023/04/25 19:00
How can I delete a tag when I edit tags with the Standard Loader (Type_ NP4H-SWN) version 2?

Select the tag you want to delete by placing the cursor on its address, move the mouse at the right-hand end of the same line, hold down the SHIFT key and pr... Show Detail
- No：1445
- Displayed Date：2023/04/25 19:00
Of the communication port settings (MICREX-SX) of the Standard Loader (Type_ NP4H-SWN), the 'Use USB port' check box cannot be selected.

To make the 'Use USB port' check box selectable, the USB driver for MICREX-SX must be installed on the PC in use. Install the USB driver (dedicated) conta... Show Detail
- No：1306
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/13 14:31
I cannot switch from online status to offline status with the Standard Loader (Type_ NP4H-SWN) version 2.

Version 2 is not based on the concept of online/offline switching. It is designed in such a way that you select online or offline when you open the screen. Show Detail
- No：1578
- Displayed Date：2023/04/25 19:00
In Standard loader (Type_NP4H-SWN), can I read the system configuration from an empty memory CPU and reflect it into the system definition?

Yes, you can. On the 'Load from PLC' dialog, check 'Reflect Real Structure,' and then connect the PLC online. If this option is checked, the loader internall... Show Detail
- No：1610
- Displayed Date：2023/04/25 19:00
The Standard Version 2 requires an instance number to be input for the address input of differentiation contacts and differentiation coils. What sh...

Differentiation contacts and differentiation coils are instructions categorized as system FB. The instance number is a number indicating the area of the syst... Show Detail
- No：1532
- Displayed Date：2023/04/25 19:00
With the Standard Loader (Type_ NP4H-SWN) version 2, colors can be specified for local timers and counters. How can I color them in print?

The Standard Loader does not support color printing. Show Detail
- No：1332
- Displayed Date：2023/04/25 19:00
Is it possible to use the M/L area in the user FB with the Standard Loader (Type_ NP4H-SWN)?

Yes_ however, it is not recommended in terms of program reuse. It is better to use internal memory such as M and L by connecting them to the I/O terminals ... Show Detail
- No：1565
- Displayed Date：2023/04/25 19:00