You can access the memory from a PC by setting the general-purpose communication module (Type_ NP1L-RS2) to 'Loader' mod

You can mount or remove a CPU module during system operation, but not a power supply module. [Related document] For th

Yes, it is possible. Use a card with the following memory capacities_ SPH300_ 2 GB or less SPH2000_ 32 GB or less (PI

The IP address and port standard No. of the self station of the Ethernet module are stored in the internal ROM of the Et

This only stops the operating CPU and the operation is not switched to the standby CPU.

You cannot mount the following I/O modules_ (1) High-speed input module NP1X3206-A, (2) High-speed output module NP1Y32

You can use it as a standard base board by setting its station No. to '00.' In this case, you also need to set the syste

The IP address of the Ethernet module will become effective when the power supply is turned off once and then turned on

No, there isn't. Receive the external power supply as an external input to detect the status.

Use an optical fiber cable (Type 2-C-LAP) provided by Sumitomo Electric Industries, Ltd.

Skip navigation menu

Regional Websites
Americas

USA

Europe

France

Germany
Asia

China

Japan

Singapore

Hong Kong

Korea

Taiwan

India

Malaysia

Thailand

Indonesia

Philippines

Vietnam
Download documents

About Us

About Us Top
Products & Solutions

Products & Solutions Top
Investor Relations

IR Top
Sustainability

Sustainability Top

Font Size
S
M
L

GLOBAL > PLC > SPH

Latest FAQ

When I write parameter to LonWorks module (NP1L-LW1) using support tool for a LonWorks (NP4N-LNDF), what is the required cable?
When I set the high-speed counter module (NP1F-HC2) to the preset operation mode of the multi-functional counter FB, the preset is disabled in the ...
Are there any restrictions on the mounting position of the I/O modules and communication modules on the base? I'd like to place the communication m...
When using a communication module (NP1L-RS1/RS2/RS3/RS4/RS), the FB outputs R_STS 'C0' (Hardware error detected) during receiving. In this case, ho...
When I attempted to download a project to a CPU with user ROM card by using D300win, a message appeared saying 'Invalid loader command process!' an...

GLOBAL

Search by category

Keyword Search

FAQ within [ SPH ]

61-70 of Total 235

≪ 7 / 24page ≫

I want to access the data memory in the MICREX-SX CPU from a PC via the RS-232C port of the general-purpose communication module. (Data read/write)

You can access the memory from a PC by setting the general-purpose communication module (Type_ NP1L-RS2) to 'Loader' mode. Various loader commands have been... Show Detail
- No：1615
- Displayed Date：2023/04/25 19:00
- Category： Communication (Others)
Can I mount or remove a CPU module and a power supply module on a hot plug base board while the system power is on?

You can mount or remove a CPU module during system operation, but not a power supply module. [Related document] For the details of hot plugging function, r... Show Detail
- No：1600
- Displayed Date：2023/04/25 19:00
- Category： Main unit
Is it possible to use a commercial CF card for the CPU module supporting CF card mounting?

Yes, it is possible. Use a card with the following memory capacities_ 　SPH300_ 2 GB or less SPH2000_ 32 GB or less (PIO mode supporting model) Note that so... Show Detail
- No：1593
- Displayed Date：2023/04/25 19:00
- Category： Accessory
After I replaced an Ethernet module (Type_NP1L-ET1/ET2), it cannot communicate with the target device. What is a possible cause?

The IP address and port standard No. of the self station of the Ethernet module are stored in the internal ROM of the Ethernet module. After replacing an Eth... Show Detail
- No：1590
- Displayed Date：2023/04/25 19:00
- Category： Communication (Ethernet)
What happens when I set the key switch of the operating CPU to STOP while using the redundancy function of the SPH300? Is the operation switched t...

This only stops the operating CPU and the operation is not switched to the standby CPU. Show Detail
- No：1588
- Displayed Date：2023/04/25 19:00
- Category： Main unit
Are there any I/O modules that cannot be mounted on the T-link expansion base?

You cannot mount the following I/O modules_ 　(1) High-speed input module NP1X3206-A, (2) High-speed output module NP1Y32T09P1-A, (3) Analog input module NP... Show Detail
- No：1577
- Displayed Date：2023/04/25 19:00
- Category： Communication (T-link)
Can I use a base board with station No. setup function (Type_ NP1B*-**S) as a standard base board (without 'S' at the end of type code)?

You can use it as a standard base board by setting its station No. to '00.' In this case, you also need to set the system definition of the loader designed f... Show Detail
- No：1531
- Displayed Date：2023/04/25 19:00
- Updated DTM：2023/06/09 13:50
- Category： Main unit
The D300win cannot connect to the SX via the Ethernet module.

The IP address of the Ethernet module will become effective when the power supply is turned off once and then turned on again after the module driver is dow... Show Detail
- No：1434
- Displayed Date：2023/04/25 19:00
- Category： Communication (Ethernet)
Is there an RAS that detects an error of the external power supply used for an I/O module?

No, there isn't. Receive the external power supply as an external input to detect the status. Show Detail
- No：1388
- Displayed Date：2023/04/25 19:00
- Category： Main unit
Which optical fiber cable for an SX bus should I choose for outdoor use?

Use an optical fiber cable (Type 2-C-LAP) provided by Sumitomo Electric Industries, Ltd. Show Detail
- No：1315
- Displayed Date：2023/04/25 19:00
- Category： Communication (Others)